Documents: Go to download!
- Owner's manual - (English)
User manual of Frigidaire FFU21F5HWU (11 pages)
- Important Safety Instructions
- First Steps
- Energy Saving Tips
- Setting the Temperature Control
- Freezer Optional Features
- Care and Cleaning
- Power Failure/Freezer Failure
- TROUBLESHOOTING GUIDE
Table of contents
Use & Care Guide for Upright Freezer
Important Safety Instructions
Read all instructions before using this freezer.
WARNING For your safety
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this unit or any other appliance. Read product labels for flammability and other warnings.
WARNING Child Safety
- Destroy carton, plastic bags, and any exterior wrapping material immediately after the freezer is unpacked. Children should never use these items for play. Cartons covered with rugs, bedspreads, plastic sheets or stretch wrap may become airtight chambers and can quickly cause suffocation.
- A child might suffocate if he crawls into the freezer to hide or play. Remove the door/lid of the freezer when not in use, even if you plan to discard the freezer. Many communities have laws requiring you to take this safety precaution.
- Remove or discard any spacers used to secure the shelves during shipping. Small objects are a choke hazard to children.
WARNING Risk of Child Entrapment
Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators or freezers are still dangerous - even if they will sit for "just a few days". If you are getting rid of your old refrigerator or freezer, please follow the instructions below to help prevent accidents:
- Remove the door/lid. If your door has electronic controls, have it removed by a qualified technician.
- Leave shelves in place so children may not easily climb inside.
- Have the refrigerant removed by a qualified technician.
ELECTRICAL INFORMATION
These guidelines must be followed to ensure that safety mechanisms in the design of this freezer will operate properly.
- Refer to the serialplate for correct electrical rating. The power cord of the appiiance is equipped with a three prong plug for your protection against shock hazards. It must be plugged directly into a properly groundedthree prong receptacle, protected with a 15 amp timedelay fuse or circuit breaker. The receptacle must be installed in accordance with local codes and ordinances. Consult a qualified electrician. Receptacles protected by Ground Fault Interrupters (GFI) are NOT RECOMMENDED. DO NOT USE AN EXTENSION CORD OR ADAPTER PLUG.
- If voltage varies by 10% or more, freezer performance may be affected. Operating freezer with insufficient power can damage the motor. Such damage is not covered under the warranty. If you suspect your household voltage is high or low, consult your power company for testing.
- To prevent the freezer from being turned off accidentically, do not plug unit into an outlet controlled by a wall switch or pull cord.
- Do not pinch, knot, or bend the cord in any manner.
OTHER PRECAUTIONS
- To defrost freezer, always unplug unit first.
- Never unplug the freezer by pulling on the cord. Always grip the plug firmly, and pull straight out from the receptacle.
- Turning the temperature control to OFF turns off the compressor, but does not disconnect the power to the light bulb or other electrical components.
Avoid fire hazard or electric shock. Do not use an extension cord or an adapter plug. Do not remove any prong from the power cord.
Grounding type wall receptacle
First Steps
This Owner's Guide provides specific operating instructions for your model. Use the freezer only as instructed in this Owner's Guide. Before starting the freezer, follow these important first steps.
INSTALLATION
- Choose a place that is near a grounded electrical outlet. Do Not use an extension cord or an adapter plug.
- For the most efficient operation, the freezer should be located where surrounding temperatures will not exceed 110°F (43°C). Temperatures of 32°F (0°C) and below will NOT affect freezer operation. Additional compressor heaters are not recommended.
- Allow space around the unit for good air circulation. Leave a 3 inch (75 mm) space on all sides of the freezer for adequate circulation.
NOTE: The exterior walls of the freezer may become quite warm as the compressor works to transfer heat from the inside. Temperatures as much as 30°F warmer than room temperature can be expected. For this reason it is particularly important in hotter climates to allow enough space for air circulation around your freezer.
LEVELING
The freezer must have all bottom corners resting firmly on a solid floor. The floor must be strong enough to support a fully loaded freezer. NOTE: It is VERY IMPORTANT for your freezer to be level in order to function properly. If the freezer is not leveled during installation, the door may be misaligned and not close or seal properly, causing cooling, frost, or moisture problems.
To Level Upright Models:
After discarding crating screws and wood base, use a carpenter's level to level the freezer from front-to-back. Adjust the plastic leveling feet in front, Y2bubble higher, so that the door closes easily when left halfway open.
To Level Chest Models:
If needed, add metal or wood shims between foot pads and floor.
CLEANING (PRIOR TO USE)
- Wash any removable parts, the freezer interior, and exterior with mild detergent and warm water. Wipe dry. Do not use harsh cleaners on these surfaces.
- Do not use razor blades or other sharp instruments, which can scratch the appliance surface when removing adhesive labels. Any glue left from the tape can be removed with a mixture of warm water and mild detergent, or touch the residue with the sticky side of tape already removed. Do not remove the serial plate.
Caution : To allow door to close and seal properly, DO NOT let food packages extend past the front of shelves.
DOOR REMOVAL (NON-ELECTRONIC MODELS)
If door must be removed:
1. Gently lay freezer on its back, on a rug or blanket.
2. Remove two base screws and base panel.
3. Remove bottom hinge screws.
4. Remove plastic top hinge cover.
5. Remove screws from top hinge.
6. Remove top hinge from cabinet.
7. Remove door and bottom hinge from cabinet.
8. To replace door, reverse the above order and securely tighten all screws to prevent hinge slippage.
DOOR REMOVAL (ELECTRONIC MODELS)
If door must be removed:
- Door hinge is fastened with tamper-proof screws. Please have a qualified technician remove the door.
Energy Saving Tips
- The freezer should be located in the coolest area of the room, away from heat producing appliances or heating ducts, and out of direct sunlight.
- Let hot foods cool to room temperature before placing in the freezer. Overloading the freezer forces the compressor to run longer. Foods that freeze too slowly may lose quality or spoil.
- Be sure to wrap foods properly, and wipe containers dry before placing them in the freezer. This cuts down on frost build-up inside the freezer.
- Freezer shelves should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere with cold air circulation, making the freezer less efficient.
- Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible.
Setting the Temperature Control
COOL DOWN PERIOD
- For safe food storage, allow 4 hours for the freezer to cool down completely. The freezer will run continuously for the first several hours. Foods that are already frozen may be placed in the freezer after the first few hours of operation. Unfrozen foods should NOT be loaded into the freezer until the freezer has operated for 4 hours.
- When loading the freezer, freeze only 3 pounds of fresh food per cubic foot of freezer space at one time. Distribute packages to be frozen evenly throughout the freezer. It is not necessary to turn the control knob to a colder setting while freezing food.
TEMPERATURE CONTROL
Electromechanical Temperature Control (Chest and Some Upright Models)
The electromechanical temperature control is located inside the freezer on upright models, and on the left exterior wall on chest models (see figure 1). The temperature is factory preset to provide satisfactory food storage temperatures. However, the temperature control is adjustable to provide a range of temperatures for your personal satisfaction. To adjust the temperature setting, turn the temperature control knob clockwise or counter clockwise. Allow several hours for the temperature to stabilize between adjustments.
Standard Electronic Temperature Control (Some Up= right Frost Free Models)
The standard electronic temperature control is located outside the freezer (see Figure 1). Temperature is factory preset to provide satisfactory food storage temperatures. To adjust the temperature setting, move the UP symbol for colder temperatures and DOWN symbol for warmer temperatures on the control panel. Allow several hours for the temperature to stabilize between adjustments.
To turn off freezer, press DOWN symbol until display shows "1". Press three more times until display shows "0". To activate freezer, press UP three times until display shows "1" then press to desired setting.
To keep the temperature setting from being accidentally changed, the control may be locked. This is done by pressing "Alarm Reset" for 3 seconds. '1" will then appear on display. To unlock the control, press "Alarm Reset" for 3 seconds. For the first second, "U" will appear, and then the current temperature will appear.
- Temp Alarm
This feature is designed to provide a warning if the inside temperature exceeds 23°R "HI TEMP" feature operates on household electricity. It will not function if household electricity is interrupted.
- When the freezer is initially plugged in, the red "HI TEMP" indicator will be on and the buzzer will sound. The indicator light will stay on until the freezer temperature is below 23°R To silence the buzzer, press the ALARM RESET button.
- If a malfunction causes the temperature inside the freezer to rise above 23°F, the "HI TEMP" light will turn on and the buzzer will sound. The buzzer will sound every five minutes until the freezer temperature is below 23°R To silence the buzzer, press the ALARM RESET button.
- Door Ajar Alarm
This feature provides a warning if the the door is open for more than five minutes. There will be a beep every five seconds and the "Door Ajar" indicator will light up. Press "Alarm Reset" to turn the alarm off. The "Door Ajar" indicator will remain lit unril the door is closed. If the door remains open for 15 minutes or more, the interior lamp will turn off.
Should an "E" appear on display, contact your authorized service technician for repair. Until changes are made, freezer will continue to run.
Deluxe Electronic Temperature Control (Some Upright Frost Free Models)
Refer to the Electronics Control Guide supplied when you purchase a deluxe electronic upright model. See Figure 3 for deluxe electronics control panel.
Freezer Optional Features
NOTE: Your freezer may have some, or all of the features listed below. Become familiar with these fea= tures, and their use and care.
SECURITY LOCK WITH POP OUT KEY
This security lock fastens the door snugly, ensuring stored food is secure. To lock or unlock the freezer, push the key into the lock and turn. The key pops out of the lock after it has been turned.
SLIDE OUT BASKET (SOME UPRIGHT MODELS)
A Slide-Out Basket (some models), located at the bottom of the freezer, provides separate storage space for items that are difficult to store on freezer shelves. To remove the basket, pull out and lift up.
INTERIOR LIGHT
The light comes on automatically when the door is opened. To replace the light bulb, turn the temperature control to OFF and unplug the electrical cord. Replace the old bulb with a bulb of the same wattage.
ADJUSTABLE SHELF (SOME UPRIGHT MODELS)
This shelf can be moved to one or two positions. Lift the shelf up and out to move to the desired location.
SLIDE ASIDE BASKET (SOME CHEST MODELS)
This basket helps organize odd-shaped items. To reach other packages in the freezer, slide the basket aside, or lift out.
FAST FREEZING SHELVES (MANUAL DEFROST UPRIGHT MODELS)
These shelves contain cooling coils to freeze foods quickly and allow cold air to constantly circulate throughout the freezer. Do not use sharp metal objects such as ice picks or scrapers to clean the shelves. This could damage the shelves and reduce their cooling ability. These shelves are not adjustable.
TILT OUT SHELF (SOME UPRIGHT MODELS)
This shelf is located inside on the freezer door and provides additional storage space. To access an item, tilt the top of the "basket" shelf down.
ADJUSTABLE DOOR BiNS (SOME UPRIGHT MODELS)
Adjustable door bins are located inside on the freezer door and provide flexible storage space. The number of bins provided varies by model.
SOFT FREEZE ZONE (SOME UPRIGHT MODELS)
Soft Freeze Zone is specifically designed to maintain a higher temperature than the rest of the freezer to store products such as ice cream.
PIZZA SHELF (SOME UPRIGHT MODELS)
Here is the place to store up to four extra-large boxes of frozen pizza without ever having to dig them out from beneath a pile of other stored goods.
The pizza shelf can be retracted to provide space for larger items on the shelf below and still store up to two more pizzas.
BASKET DIVIDER (SOME UPRIGHT MODELS)
Use these handy dividers to keep the various items stored in your baskets more organized. To change the location of the divider simply slide your basket out, grab the divider from the center and rotate in a counter-clockwise direction until it is disengaged. To assemble, simply align as shown in the figure below and rotate in a clockwise direction until it spans into place.
SHELF BOOKEND (SOME UPRIGHT MODELS)
Glass Shelf Bookend
Use these handy bookends to keep the various boxed items stored neatly in your freezer. To adjust location, simply slide where desired.
Wire Shelf Bookend
Use these handy bookends to keep the various boxed items stored neatly in your freezer. To adjust location,simply unsnap the bookend from the wire shelf and snap into the next desired location.
CHEST DIVIDER (SOME CHEST MODELS)
Use these clever dividers to custom=arrange a variety of different-sized storage bins inthe bottom of your chest freezer. Use the peel-n-stick labels found in your literature packet to help remind you which items are stored where. If you have an item that isn't already covered by one of the pre-printed labels then use one of the blank labels and a permanent marking pen to make your own custom label. Labels can be peeled off when no longer needed and replaced by new and different ones.
Examples of Chest Divider Configurations:
Care and Cleaning
CAUTION : Damp objects stick to cold metal surfaces. Do not touch interior metal surfaces with wet or damp hands.
Freezer must be unplugged (to avoid electrical hazard) from power source when defrosting unit.
Some upright freezers are frost-free and defrost automatically, but should be cleaned occasionally.
BETWEEN DEFROSTINGS
To avoid frequent defrosting, occasionally use a plastic scraper to remove frost. Scrape with a pulling motion. Never use a metal instrument to remove frost.
DEFROSTING
It is important to defrost and clean the freezer when 1Ato V2inch of frost has accumulated. Frost may tend to accumulate faster on the upper part of the freezer due to warm, moist air entering the freezer when the door is opened. Remove food and leave the door open when defrosting the freezer.
To Defrost Upright Models with Defrost Drain:
- Remove the drain plug on the inside floor of the freezer by pulling it straight out.
- To access external drain tube on models with a base panel, first remove the two screws from the base panel. Locate the drain tube near the left center under the freezer.
- Place a shallow pan under the drain tube. Defrost water will drain out. Check the pan occasionally so water does not overflow (see figure 1).
- . A 1/2 inch garden hose adapter can be used to drain the freezer directly into a floor drain. Ifyour model is not equipped with an adapter, one can be purchased at most hardware stores.
- Replace the drain plug when defrosting and cleaning are completed. If the drain is left open, warm air may enter the freezer.
To Defrost Chest Models with Defrost Drain:
- Place a shallow pan or the Divider/Drain Pan (if equipped) beneath the drain outlet. Pull out the outside drain plug (see figure 2). A 1/2inch garden hose adapter can be used to drain the freezer directly into afloor drain (see figure). If your model is not equipped with an adapter, one can be purchased at most hardware stores.
- Pull out the drain plug inside the freezer (see figure 4). Defrost water will drain out. Check pan occasionally so water does not overflow.
- Replace the drain plugs when defrosting and cleaning are completed. If the drain is left open, warm air may enter the freezer.
To Defrost Models without Defrost Drain:
- Place towels or newspapers on the freezer bottom to catch the frost. The frost will loosen and fall.
- Remove the towels and/or newspapers. If the frost is soft, remove it by using a plastic scraper.
- If the frost is glazed and hard, fill deep pans with hot water and place them on the freezer bottom.
- Close the freezer door/lid. Frost should soften in about fifteen (15) minutes.
- Repeat this procedure is necessary.
CLEANING THE INSIDE
After defrosting, wash inside surfaces of the freezer with a solution of two tablespoons of baking soda in one quart (1.1 litres) warm water. Rinse and dry. Wring excess water out of the sponge or cloth when cleaning in the area of the controls, or any electrical parts.
Wash the removable parts and door basket with the baking soda solution mentioned above, or mild detergent and warm water. Rinse and dry. Never use metallic scouring pads, brushes, abrasive cleaners, or alkaline solutions on any surface. Do not wash removable parts in a dishwasher.
CLEANING THE OUTSIDE
Wash the cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth. Replace parts and food.
Do not use razor blades or other sharp instruments, which can scratch the freezer surface when removing adhesive labels. Any glue left from the tape can be removed with a mixture of warm water and mild detergent, or touch the residue with the sticky side of the tape already removed.
DO NOT REMOVE THE SERIAL PLATE.
VACATION AND MOVING TIPS
Short Vacations:
- Leave the freezer operating during vacations of less than three weeks.
Long Vacations:
If the freezer will not be used for several months:
- Remove all food and unplug the power cord.
- Clean and dry the interior thoroughly.
- Leave the freezer door open slightly, blocking it open if necessary, to prevent odor and mold growth.
Moving: When moving the freezer, follow these guidelines to prevent damage:
- Disconnect the power cord plug from the wall outlet.
- Remove foods, then defrost, and clean the freezer.
- Secure all loose items such as base panel, baskets, and shelves by taping them securely in place to prevent damage.
- In the moving vehicle, secure freezer in an upright position to prevent movement. Also protect outside of freezer with a blanket, or similar item.
WARNING : If leaving the freezer door open while on vacation, make certain that children cannot get into the freezer and become entrapped.
Power Failure/Freezer Failure
NOTE: Do not open freezer door unnecessarily if freezer is off for several hours.
If a power failure occurs, frozen foods will stay frozen for at least 24 hours if the freezer is kept closed. If the power failure continues, pack seven or eight pounds of dry ice into the freezer every 24 hours. Look in the Yellow Pages under Dry Ice, Dairies, or Ice Cream Manufacturers for local dry ice suppliers. Always wear gloves and use caution when handling dry ice.
If the freezer has stopped operating, see Freezer Does Not Run in the Troubleshooting Guide. If you cannot solve the problem, call an authorized servicer immediately.
If the freezer remains off for several hours, follow the directions above for the use of dry ice during a power failure.
If necessary, take the food to a local locker plant until the freezer is ready to operate. Look in the Yellow Pages under Frozen Food Locker Plants.
TROUBLESHOOTING GUIDE
Before calling for service, review this list. It may save includes common occurences that are not the result materials in this appliance.
PROBLEM | CAUSE | CORRECTION |
FREEZER DOES NOT RUN | ||
Freezer does not run. |
|
|
Freezer runs too much or too long. |
|
|
Interior Freezer temperature too cold. |
|
|
Interior Freezer temperature is too warm. |
|
|
Freezer external surface temperature is warm. |
|
|
SOUND AND NOISE | ||
Louder sound levels whenever freezer is on. |
|
|
Longer sound levels when compressor comes on. |
|
|
Popping or cracking sound when compressor comes on. |
|
|
Bubbling or gurgling sound, like water boiling, |
|
|
Vibrating or rattling noise. |
|
|
WATER/MOISTURE/FROST INSIDE FREEZER | ||
Moisture forms on inside freezer wails. |
|
|
WATER/MOISTURE/FROST OUTSIDE FREEZER | ||
Moisture forms on ouside of freezer. |
|
|
ODOR IN FREEZER | ||
Odors in freezer |
|
|
DOOR PROBLEMS | ||
Door will not close. |
|
|
LIGHT BULB IS NOT ON | ||
Light bulb is not on. |
|
|
See other models: CGLMV169DBB FGHB2868TF5 FDB750RCQ0 FFHT1831QE1 FRT21IS6JS2