Loading ...
Loading ...
Loading ...
10
To reduce the risk of tipping the unit by abnormal usage or improper loading, the appliance must be
secured by properly installing the anti-tip device packed with the appliance.
• Place the anti-tip bracket on the floor as shown in the figure. An anti-tip bracket must be installed
at the left side.
• Mark the locations of the 4 holes of the anti-tip bracket on the floor.
• Use a 5/16” masonry drill bit and insert plastic anchors.
• Secure bracket to floor using screws.
• Slide appliance into position and make sure the leg engages the anti-tip bracket.
NOTE: If the unit is relocated, the bracket must be removed and installed in the new location.
Installing the Stainless Steel Handle
This appliance includes a stainless steel handle that is not required
to operate the unit. To install the handle, follow the instructions
below:
Locate the handle (1) over the mounting stub (3) of the door and
using the supplied Allen key, tighten the securing grub screws (2) to
fix the handle.
OPERATING YOUR APPLIANCE
Loading ...
Loading ...
Loading ...