Kenmore 36314475790 dishwasher

User Manual - Page 7

For 36314475790.

PDF File Manual, 20 pages, Download pdf file

Loading ...
Loading ...
Loading ...
nearance may vary
_11111111111 I
POTS N0nM_L Ur_T WATI3 WATEItNOk_tT MSt'T
RUd WASm W/din _ HEM m
mmmmm mmm
\
wJb_llXnJtv : 1 $T_UlT
_LAV g
oft
PtAI1E
Wml V
,==.=%.0=.
STARTING YOUR DISHWASHER
Load the dishwasher (see pages 11
and 12).
Add detergent (see page 10).
Close the door but do not latch it.
If dishwasher drains into a food waste
disposer, operate disposer until it is
empty.
Turn on hot water faucet nearest
dishwasher and let it run until the water
is hot.
Push selector buttons for desired cycles
and options.
For all cycles but RINSE & HOLD,
slowly turn the Dial to START. Then latch
door to start the dishwasher.
,,you plan to use the RINSE & HOLD
_le, push the NORMAL WASH button
J turn the Dial to the desired cycle.
Then latch the door to start the
dishwasher.
If you plan to use the PLATE WARMER
option (which is for warming clean dishes
and plates for the serving of hot foods),
follow these steps:
1. Load Clean dishware to be warmed.
2. Make sure NO HEAT DRY is not
selected.
3. Be sure the door is unlatched.
4. Slowly turn the Dial to PLATE
WARMER.
5. Latch door to start the cycle.
When NOT using WASH DELAY
Slowly turn the Dial to START for the
NORMAL WASH cycle. Then latch the
door to start the dishwasher.
When using WASH DELAY (for all cycles)
Slowly turn the Dial to desired delay
time (up to 5 hours). Then latch the door
to start the timer.
The DELAY light willcome on and stay on
untilthe dishwasher starts automatically
at the end of the selected delay time.
SELECT THE CYCLE
WAImO_4V I _r&ql
For heavily soiled dishes and pots and pans. _ "- ,' '
Cycle Time: Approx. 95 minutes* m
Water Usage: Approx. 9.3 gallons ,_,
* Unex_'ended times. These cycle times will be increased approximately 21 minutes
for your dishwasher to heat the water for good washability when you use the WATER
HEAT option.
7
Loading ...
Loading ...
Loading ...