Craftsman 917378060 lawn mower

User Manual - Page 7

For 917378060.

PDF File Manual, 31 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Theoperationofanylawn
mowercanresultin
foreign objects thrown into
the eyes, which can result
in severe eye damage.
Always wear safety glasses or eye
shields while operating your lawn mower
or performing any adjustments or repairs.
We recommend a wide vision safety
mask over spectacles or standard safety
glasses.
HOWTO USEYOUR LAWN MOWER
ENGINE SPEED
The engine speed is controlled by a
throttle located on the side of the upper
handle. Fast position isfor starting,
normal cutting, trimming and better grass
bagging. Slow position is for light cutting,
trimming and fuel economy.
,_ Slow
Fast ,"- .
ENGINE ZONE CONTROL
_CAUTION: Federal regulations require
an engine control to be installed on this
lawn mower in order to minimize the dsk
of blade contact injury. Do not under any
circumstances attempt to defeat the
function of the operator control. The blade
turns when the engine is running.
Your lawn mower is equipped with an
operator presence control bar which
requires the operator to be positioned
behind the lawn mower handle to start
and operate the lawn mower.
TO ADJUST CUTTING HEIGHT
Raise wheels for low cut and lower
wheels for high cut, adjust cutting height
to suit your requirements. Medium
position is best for most lawns.
To change cutting height, squeeze
adjuster lever toward wheel. Move
wheel up or down to suit your require-
ments. Be sure all wheels are in the
same setting.
NOTE: Adjuster is properly positioned
when plate tab inserts into hole in lever.
Also, g-position adjusters (if so equipped)
allow lever to be positioned between the
plate tabs.
PlateTab
LowerWheelsfor HighCut I _,
Lever
RaiseWheels for Low Cut
TO CONVEFITTO DISCHARGING
MOWER
Your mower is shipped ready to be used
as a mulcher. To convert to bagging or
discharging:
Lift discharge guard and remove
muloher plate.
Mower can now be used for side
discharging or optional grass catcher
can be attached.
To return to mulching operation, simply
reinstall mulcher plate as shown.
ACAUTION: Do not run your lawn
mower without discharge guard, ap-
proved grass catcher or mulcber plate in
place.
Dischargeguard
\
Mulcher plate
7
Loading ...
Loading ...
Loading ...