Loading ...
Loading ...
Loading ...
Outside
When the washer is not in use, turn the water faucets off to prevent pressure
build- up in the hoses.
Do not store items or cleaning products on top of the Laundry Center. Be
careful when handling laundry products. They can damage the finish on
the appliance and control panel.
Clean the cabinet with mild soap and water. If top or lid become stained, clean
with diluted chlorine bleach (1/2 cup in 1 quart water). Rinse several times with
clear water. Any glue left from the tape or energy label can be removed with a
mixture of warm water and mild detergent. Or, touch the residue with the sticky
side of tape already removed.
Jill
Do not obstruct the flow of ventilating air. Do not stack or place laundry or rugs
against the front of the Laundry Center.
Before moving the Laundry Center, place a hard-surfaced strip under the
front leveling legs to prevent damage to the floor covering.
Care and Cleaning
(continued)
Do not store items or cleaning
products on top of the
Laundry Center.
Tinting
If tints and dyes are used in the washer, some washer parts, such as the agitator
and tub, will take on the color of the dye. The color will not harm the parts and
will not transfer to future loads if the washer is cleaned as directed.
After tinting, wipe any splashings from the cabinet and lid. Then run the washer
through a hot wash cycle using detergent and bleach.
When using tints or dyes, always follow package directions. Be sure that items
to be dyed are machine washable. Please note that tinted clothes will not he
colorfast and should be washed separately to avoid transferring color to other
garments.
Winterizing Instructions
If your washer is stored in an area susceptible to freezing conditions or moved
in freezing cold weather, follow these winterizing instructions to
prevent possible damage to the unit:
1. Turn off water supply faucet.
2. Plug the electrical cord into a properly grounded electrical outlet.
3. Add i gallon of non-toxic Recreational Vehicle antifreeze (available from
a hardware or recreational vehicle store) to the empty washer tub. Close
the lid.
4. Push in timer knob, turn knob clockwise to SPIN and pull the knob out.
5. Let the washer spin for 1 or 2 minutes to let all water drain out. Some, but
not all, of the RV antifreeze will be expelled.
6. Push in the timer knob, dry the tub interior, disconnect the electrical plug,
and close the lid.
7. Disconnect hoses from water supply and drain water from hoses.
Store the Laundry Center in an upright position.
NOTE: To clean out antifreeze after storage, run the empty washer through a
complete cycle using detergent. Do not add clothes load.
17
Loading ...
Loading ...
Loading ...