KitchenAid KUDS25SHAL1 dishwasher

User Manual - Page 15

For KUDS25SHAL1.

PDF File Manual, 22 pages, Download pdf file

Loading ...
Loading ...
Loading ...
SaniRinseoption
Select this option to raise the water temperature inthe final
rinse to approximately 155° F (68° C) for 10 minutes. This
high-temperature rinse sanitizes your dishes and
glassware in accordance with the NSF International
requirements (#95/480/05/2480).
%
NOTE: The Anti-Bacteria cycle automatically uses this
option. Sani Rinse isan optionwith allother cycles, except
RinseOnly and Light/China.
Delay Hours
Select this option to runyour dishwasher at a later time or
during off-peak hours.
To delay the start
1. Close the door.
2. Select a wash cycle and option(s).
3. PressDELAY HOURS 1 time for a 2-hour delay, 2 times
for a 4-hour delay, or 3 times for a 6-hour delay start.
%
The number glows above Delay Hours. The dishwasher
starts the cycle in the selected number of hours.
4. Press START.
NOTE: To cancel the delay, press DELAY HOURS untilno
number is lit.
IMPORTANT:
Operate your dishwasher only when you are at home.
If your home isequipped with a water softener, do not
start the dishwasher during the regeneration of the
softener.
Control Paael Lights
Cycle Monitor
Followthe progressof your dishwasher cycles on the
Cycle Monitor,CLEAN glows when a cycle is finished,The
lightturns off when you open the door.
s | m m n m
)I_F_#I*I_KOJ_H£eT
SANI-RINSE
CLEAN COMPLETED
Water Heating light
WATER HEATING glows, and the cycle progression
pauses, whenever water is heated during a cycle. Wash or
rinse action continues as the water heats.
WATER HEATING
Sensing light
Your dishwasher senses the soil levelon the dishes. Soil
level determines the length of some cycles, the amount of
heat added to a wash or rinse, and the cycle needed for
the load. SENSING glows during the soil sensing parts of
the cycle. Wash action continues while sensing occurs.
SENSING
Child Lock light
Use Child Lock to prevent your dishwasher from
accidentally being turned on. Use Child Lock, also,to
prevent accidental cycleor optionchanges during a cycle.
When CHILD LOCK is lit,all buttons are disabled. You can
turn on Child Lock whilethe dishwasheris running.
CHILD LOCK
To turn Child Lock on
Press and hold
for 4 seconds. CHILD LOCK glows. If you press any pad
while your dishwasher is locked, the light flashes 3 times.
To turn Child Lock off
Pressand hold ENERGY SAVER DRY for 4 seconds. The
lightturns off.
NOTE: The dishwasherdoor can be opened while Child
Lock is on.
15
Loading ...
Loading ...
Loading ...