Loading ...
Loading ...
Loading ...
www.kingsbottle.com" 11
OPERATION
PART V"" OPERATING YOUR REFRIGERATOR
Each wine cooler includes an operating panel on the front of the unit. This operating panel includes several features to operate and control the temperature of
both the upper and lower zones of the wine cooler.
The operating panel includes the following features:
ON/OFF: Turns the wine cooler power on or off.
TEMP. SET UPPER ZONE: Adjusts and displays, via LED, the desired temperature and the actual temperature of the upper zone.
TEMP. SET LOWER ZONE: Adjusts and displays, via LED, the desired temperature and the actual temperature of the lower zone.
LIGHT: Turns the interior wine cooler light on or off.
SELECT: Allows the user to select to control the UPPER or LOWER zone.
C/F SWITCH: Switch between °C and °F
SETTING THE TEMPERATURE CONTROL
IMPORTANT: IN ORDER FOR THIS UNIT TO FUNCTION AT OPTIMUM LEVEL, THE LOWER COMPARTMENT SHOULD BE SET AT LEAST 4-DEGREES (F)
HIGHER THAN THE UPPER COMPARTMENT.
1. Make sure the power cord is connected to a properly grounded outlet.
2. Turn Power ON.
3. Press the “SELECT” button to choose the “UPPER” or “LOWER” zone. Each zone is independently controlled.
•
Upper Zone: The temperature setting can be adjusted between 41°F to 60°F
•
Lower Zone: The temperature setting can be adjusted between 45°F to 64°F
4. Set the temperature of the Upper Zone or Lower Zone as you desire by pushing the UP or DOWN button. When you push the two buttons for the first
time, the LED readout will show the original temperature set at the previous time.
5. Once you have set the desired temperature, wait for 5 seconds. The temperature shown in both Upper and Lower zone display panels will automatically
switch to show the actual temperature inside the unit. The actual temperature will always be shown until the next time you press the UP or DOWN button
to change the temperature settings.
NOTE: The desired temperatures may fluctuate depending on whether the interior light is ON or OFF, the ambient temperature, the location of the unit and
the orientation of the bottles. The display is just a guide, be guided by how cold your drinks are at consumption. Remember units go into defrost mode, and
this will show a higher display, it’s only for short periods and doesn’t have time to affect drink temperature. In general, once the unit has settled, it will keep
products within 5°F (2°C) of the set temp easily in temperatures up to and beyond 100°F (38°C).
TEMPERATURE SETTINGS FOR WINE SERVICE
Different varietals of wine require different temperature settings. The recommended temperature ranges for long term storage of different varietals of wine are
listed below.
•
Red Wines: 52-64°F
•
White Wines: 44-51°F
•
Sparkle Wines: 41-43°F
1. In the event of a power interruption, all previous temperature settings will be automatically saved and each compartment will return to the previous
temperature setting.
2. If the unit is unplugged, loses power, or is turned off, there will be a 6 minute delay for the compressor to restart after the unit is powered ON.
3. When you use the wine cooler. for the first time or restart the wine cooler after having been shut off for a long time, there will be a few degrees variance
between the temperature you select and the one indicated on the LED readout for the first few hours of operation. After a few hours of operation, the
temperature will normalize to the displayed temperature.
CAUTION
!
ON/OFF
UPPER ZONE
UP
DOWN
LOWER ZONE
LIGHT
C/F SWITCH
SELECT
Loading ...
Loading ...
Loading ...