Loading ...
Loading ...
Loading ...
8
Flush installation
Install Appliance
Electrical Installation
The ovens is dual rated, designed to be connected to
either 208/240V AC, 60 Hz, 4 wire, single-phase power
supply.
The electrical supply should be a 4-wire single-phase AC.
Install a suitable conduit box (not furnished). An
appropriately-sized, UL-listed conduit connector must be
used to correctly attach the conduit to the junction box.
NOTICE: Local Codes may vary; installation, electrical
connections and grounding must comply with all
applicable local codes.
If local codes permit grounding through the electrical
supply neutral, connect both the white neutral wire and
the bare ground wire from the oven to the white neutral
electrical supply wire.
9 CAUTION
▯ The appliance must be disconnected from the
power supply during all installation work.
▯ The appliance must only be connected with the
power cable provided.
▯ Protection against contact must be ensured by
the installation.
7RS9LHZ
PP
6LGH9LHZ
è¼ʓʘ
ë
ë
UHYHDO
èç¼ʓʘ
FOHDWV
UHYHDO
FOHDWV
IOXVKLQVHW
GHSWK
UHYHDOFOHDWV
IOXVKFXWRXW
KHLJKW
PP
èç¼ʓʘ
ʌ¼ʚ
ʌ¼ʚ
ë
ʌ¼ʚ
*
Flush installation requires a
3
/
16
" (5 mm) high x
22
1
/
16
" (560 mm) wide x 22
7
/
8
" (581 mm) deep base-
plate underneath the unit body.
Model Dedicated circuit required
HBE5452UC 20 AMP
Loading ...
Loading ...
Loading ...