Loading ...
Loading ...
Loading ...
8
REMOTE CONTROL USE
• Point the remote control at the unit, then press the ON/OFF button.
Press the mode button, then select your desired mode: AUTO, COOL, DRY, HEAT or FAN.
• Press the SET TEMPERATURE buttons to increase or decrease the readings until your
desired temperature is displayed. The room temperature range is from 16°C to 32°C. (It
will automatically default to 25°C and is non-adjustable in AUTO or DRY modes.)
• Press the FAN SPEED button to choose the air rate you want. LOW, MED or HI will be
symbolized by the number of blocks under the fan icon. If you select AUTO, the fan and
block icons will flash.
• Press the SWING button to choose the up/down air flow direction you want:
NATURAL FLOW, SWING or FIXED. (It will automatically be set to FIXED air flow
direction in DRY mode).
• Press the AIR FLOW button to choose the left/right direction button you want:
SWING, FIXED.
To be in compliance EN61000-3-11, the product should be connected to a supply of
the system impedance |Zsys|=0.141 ohms or less. Before connecting the product to
your power network, please consult with your electric supplier to ensure the power
network is above requirement.
Loading ...
Loading ...
Loading ...