Loading ...
Loading ...
Loading ...
5
• Always fill the kettle with water between
the minimum (MIN) and maximum (MAX)
marks on the water window on the
appliance. Too little water will result in
the kettle switching ‘OFF’. Filling above
the maximum mark (MAX) may result in
boiling water splashing from the kettle.
• The lid should always be locked firmly in
place in the closed position before and
during use. Do not open the lid during
operation as this may result in boiling
water splashing from the kettle. Pour
all the hot water from the kettle before
opening the lid to refill.
• When using the kettle, avoid spillage of
water on the kettle base and connector
as this may cause damage to the kettle.
• Care should be taken when handling the
kettle during use, ensuring that the kettle
body and parts are not touched as these
may still be hot due to residual heat after
boiling. Always ensure to use the kettle
handle when removing the kettle or
pouring water after kettle has boiled.
• Do not use chemicals, steel wool, or
abrasive cleaners to clean the outside of
the kettle.
• The filter could become damaged with
time, please check regularly and replace
if found damaged.
• Ensure the kettle has cooled down
before attempting to clean the filter and
appliance.
• To prevent damage to the appliance
do not uses alkaline cleaning agents
when cleaning, use a soft cloth and
mild detergent.
• Do not operate the kettle on an inclined
plane. Do not operate the kettle unless
the element is fully immersed. Do not
move while the kettle is switched on.
• Do not open the lid during operation.
• Keep the kettle clean. Follow the
cleaning instructions provided in this
book on (page 9).
WARNING:
Do not
operate the kettle on an
inclined surface. Do not
move the kettle while it is
switched on.
WARNING:
Do not
open the lid while water
is boiling.
Loading ...
Loading ...
Loading ...