Loading ...
Loading ...
Loading ...
Turn clockwise.
1
⁄4 turn.
Operation
Operation
Attach Antenna
32
Attach the Antenna
Insert.
1
2
To remove battery chamber cover, press down
on the arrow and slide down.
Install the batteries by polarity markings.
Replace cover.
Battery Installation
Attach the Belt Clip
Install the Batteries
1
2
3
Note
Ignoring polarity markings (+/-)
may cause damage to both the
unit and the batteries.
The HH 50 WX ST requires
9 “AA” alkaline or NiMH
batteries rated at 1000 mAh
(not included with
the unit).
When the batteries are low or
need charging the BATTERY
icon will flash on the LCD dis-
play. Replace alkaline batteries
or recharge NiMH batteries.
NiMH rechargeable batteries
should be charged a minimum of
12 hours with a CA-45CB charger.
NiMH rechargeables should have
a rating of 1.2 vdc, 1000 mAh.
To remove the belt
clip, lift the tab out
and slide the belt
clip down.
1
2
Attach the Belt Clip
Slide the belt clip up
on the rails of the
base until tab locks.
Cobra Electronics Corporation
HH50 WXST
Production Graphics
Jack Callouts
Color: White
Artwork No: 571-0007 - Rev A
SPK
MIC
CHG
PWR
SPK
MIC
CHG
PWR
Press and
hold down
on arrow
and slide
down
NiMH rechargeable batteries
should be charged a minimum
of 12 hours with a CA-45CB
charger.
Note
To increase range as a
portable, use HA-TA telescopic
loaded long range antenna.
(See Accessory Page 35).
HH50WXST_MANL.indd 2-3 12/14/17 3:11 PM
Loading ...
Loading ...
Loading ...