Loading ...
Loading ...
Loading ...
Careful maintenance ensures smooth operation
and long-lasting performance.
Special care must be taken with the grease lter:
To access the lter, proceed as follows:
In the Chapter → OPENING THE PANEL.
Remove the grease lter using the special han-
dle.
To replace the grease lter after cleaning, full
the same operation in reverse order.
To remove the carbon lter, if installed, follow the
same steps as the grease lter.
The carbon lter is located immediately above
the grease lter.
Warm water and neutral detergents are recom-
mended to clean up the appliance, while abrasive
products should be avoided.
If the power cord is damaged, a qualied person
must replace it.
It is possible to open the grease lter cover panel
pulling it as shown in g. 1.
The panel is xed with three magnets, there are
two safety cables to be released to remove the
panel from the product.
For proper operation, it is recommended to install
the product at a maximum distance, from the oor
level, of 2000 - 2100 mm.
MAINTENANCE
21
Loading ...
Loading ...
Loading ...