Loading ...
Loading ...
Loading ...
Problem Possible Cause Solution
Dryer Will Using a regular fuse. Replace with a time-delay fuse.
Not Run Dryer door notfirmly closed. Close dryer door tightly.
(cont'd)
PUSH TO START Button Press PUSH TO START Buttonagain.
net firmlypressed.
Controls net set in an Reset controls in an ON position.
ON position.
Lint in Load Lint screen is clogged. Cleanlint screen.Checkfor air
movement.
improper sorting. Sort lint givers from lint takers
and by color.
Load is too big or heavy. Dry smaller loads so lint can be
carriedto the lint screen.
Load is overdried, Use correct dryer settings for fabric.
Overdrying can causelint-attracting
static (see "Operating Your Dryer").
Paper or tissue in pockets. Clean out pockets before drying.
Pilling being mistaken for lint. Pilling (surface fuzz) is caused by
normalwear and laundering.
Stains on Load improper use of fabricsoftener Use fabric softener sheets in dryer.Add
in washer, at beginningof cyctewhen load iscold.
Drying soiled items, items need to be clean before
being dried.
Items Overdrying. Match dryer settingsto fabric type
Shrinking (see "Operating Your Dryer").
Poor garment quality. Check quality of garment before
purchasing.
Manufacturer's care label Follow fabric care label instructions
instructions not followed, carefully.
Loads are Overloading. Drysmaller loads thatcan tumble freely.
Wrinkled Overdrying. Match dryer settingsto fabric type
(see "Operating Your Dryer").
Load left in dryer at the Remove load as soon as tumbling
end of cycle, stops.
Odors Painting, staining or varnishing Ventilate the area. When the odors or
has recently taken place in the fumes are gone from the area, rewash
area where your dryer is located, the clothingand then dry it.
Gas Leak Turnoff gas supply line. Leaveyour
house, then call your local gas
company.
Unusual Clicking (Gas Dryers) - Normal operation.
Sounds gas valve clicking.
Thumping of rollers when Thump will go away after 5minutes
dryer has had a period of of drying.
non-use.
3O
Loading ...
Loading ...
Loading ...