Loading ...
Loading ...
Loading ...
Genera[ Cleaning
Cooktop Cleaning -
Be careful
not to bend terminal ends
when replacing elements
after cleaning
(continued)
Coil Surface Element Models Only
To Remove and Replace Surface Elements and Drip Bowls (some models)
ATTENTION: Never leave covers on the coil elements asthey could be permanently damaged
if the coil isturned on by accident.
Prior to cleaning the coil elements make sure they are cold and that control knobs are
turned to OFF
Coil elements clean themselves when they are turned on.
Coil elements and drip bowls are removable and allow to clean the drip bowls.
Toremove a coil element, push against tile front edge and lift element up and out.
To(:lean by hand, wash the drip bowls in hot sudsy water. For hard to remove spots, use nylon
scrubber with soap. Rinseand dry will still warm.
Never immerse coil elements in water.
SURFACES CLEANING AGENTS INSTRUCTIONS
Porcelain enamel Mild cleaners or soap-filled Usea damp sponge or dampened soap pad, rinse
(cooktop, surface under steel wool pads. and dry.
cooktop)
Insert - Control Panel Hot, soapy water or cleaner Use a clean soapy, dampened cloth or paper towel,
cream, remove soil and dry. Do not use abrasive products.
Porcelain enamel cooktop cleaning instructions (some models}
Do not usea cooktop cleaner on a hot cooktop. Thefumes can be hazardous to your health, and can chemically
damage the cooking surface.
Before cleaning the surface cooktop, be sure tile controls are turned to OFFand the cooktop is cool.
DO NOT use commerdaJ oven cleaners on the exterior surfaces including rangetop and door frame.
Correct and consistent cleaning isessential to maintaining your porcelain enamel cooktop. If food spills and grease spatters are
not removed, they may burn onto the surface of the cooktop and cause permanent discoloration.
Daily Cleaning
For normal soil:
1. Allow cooktop surface to cool.
2. Wipe off spills and spatters using a clean paper towel or a clean cloth with warm, soapy water.
3. If needed, use a soapy steel wool pad or other mild household cleaners.
4. Be sure to rinse off tile cleaners or tile porcelain may become damaged during future heating.
For heavy, burned-on soil:
1. Allow cooktop surface to cool.
2. Use a soap filled scouring pad with warm water or cover heavily soiled spots with a solution of clear water and ammonia.
Scour gently. Rinse and wipe dry with a clean cloth.
3. If any soil remains, apply a few drops of a recommended cooktop cleaning (:ream on tile spots and rub gently using a clean
damp cloth or scouring pad. Buff with a dry cloth until all soil and cream are removed. Frequent cleaning with the cooktop
cleaning cream leaves aprotective coating which helps in preventing scratches and abrasions.
For sugary spil!overs:
Sugary spills can chemically damage your cooktop surface. Therefore, you must begin cleaning the spillswhile the cooktop is still
hot. Usecaution when following the steps below.
1. Turn off all surface units and remove all pans immediately.
2. Wearing an oven mitt, wipe up carefully or move hot spills away from the element area with a clean damp cloth.
3. Allow the cooktop to cool. Follow the instructions above for heavy, burned-on soil.
COOKTOP CLEANING/ POLISHINGCREAM can be purchased through authorized service centers or major department stores.
18
Loading ...
Loading ...
Loading ...