Loading ...
Loading ...
Loading ...
©American Audio® - www.AmericanAudio.us - ELS GO 15BT - Instruction Manual Page 8
ELS GO 15BT Rear Panel Controls and Features
16. INSTRUMENT INPUT VOLUME - This knob is used to regulate the volume of the source con-
nected to the instrument input (18). Turning the knob in a clockwise direction will increase the
volume level.
17. MIC LEVEL - This knob is used to regulate the microphone output volume. Turning the knob in
a clockwise direction will increase the volume level.
18. LINE LEVEL INPUT VOLUME – This knob is used to regulate the output signal of the line level
source connected to the Line Level Input Jack (13).
19. 1/4” INSTRUMENT INPUT - This input jack is for instruments such as guitars.
20. MIC XLR/1/4” INPUT – This jack will accept a XLR or 1/4” plug. The volume output level for
this microphone will be controlled by the MIC Volume knob (9).
21. BALANCED RCA LINE INPUT – This connection is designed to accept a balanced line input
signal from a mixer or other line level device with a balanced output jack. Use a balanced cable
when the signal cable length exceeds 15 feet, this will reduce excessive signal loss. Be sure to
connect only line level input devices such as mixers and tape machines to this jack.
22. NEXT/VOL + BUTTON - Press this button once to go to the next song. Press and hold this
button to increase the volume of the Mp3 Player.
23. USB INPUT - Plug in any USB memory stick with Mp3 les to be played.
24. PAUSE/PLAY BUTTON - Press this button once to play your chosen song, press this button
again to momentarily interrupt playing. Press and hold this button to pause the playing song.
25. PREVIOUS/VOL - BUTTON - Press this button once to go to the previous song. Press and
hold this button to decrease the volume of the Mp3 Player.
26. MEMORY CARD INPUT - This slot is used to insert a non-violatile memory card with Mp3 les
to be read.
ELS GO 15BT Battery Charging
Battery Charging: To recharge the battery, plug the supplied power supply into the input on the rear
of the unit and plug the other end into a matching power supply. The charging LED indicator will glow
red when the speaker battery is charging. When the battery reaches full charge the LED indicator will
glow green. It takes about 8 hours to reach full charge.
Loading ...
Loading ...
Loading ...