Loading ...
Loading ...
Loading ...
49-60435-8 9
Controls and Features
Bar Refrigerator with Icemaker
Automatic
icemaker
The icemaker will produce seven cubes
per cycle—approximately 100–130 cubes
in a 24-hour period, depending on freezer
compartment temperature, room temperature,
number of door openings and other use
conditions.
If the bar refrigerator with icemaker is operated
before the water connection is made to the
water valve, set the icemaker power switch to
O (off).
When the unit has been connected to the water
supply, set the icemaker power switch to I (on).
The green light will come on.
The icemaker will fill with water when it cools to
15°F (–10°C). A newly installed bar refrigerator
with icemaker may take 12 to 24 hours to begin
making ice cubes.
You will hear a buzzing sound each time the
icemaker fills with water.
Throw away the first few batches of ice to allow
the water line to clear.
Be sure nothing interferes with the sweep of the
feeler arm.
When the bin fills to the level of the feeler arm,
the icemaker will stop producing ice. It is normal
for several cubes to be joined together.
If ice is not used frequently, old ice cubes will
become cloudy, taste stale and shrink.
If ice cubes get stuck
in the icemaker, the
green power light
will blink. To correct
this, set the icemaker
power switch to O
(off) and remove
the cubes. Set the
icemaker power
switch to I (on) to
restart the icemaker.
After the icemaker has been turned on again,
there will be a delay of about 45 minutes before
the icemaker resumes operations.
NOTE: In homes with lower-than-average
water pressure, you may hear the icemaker
cycle multiple times when making one batch
of ice.
CAUTION
Avoid contact with the
moving parts of the ejector mechanism, or with
the heating element that releases the cubes.
Do not place fingers or hands on the automatic
ice making mechanism while the refrigerator is
plugged in.
ATTENTION
Évitez le contact avec
les pièces mobiles du mécanisme éjecteur,
ou avec l’élément chauffant qui libère les
glaçons. Ne posez pas les doigts ou les mains
sur le mécanisme de la machine à glaçons
automatique pendant que le réfrigérateur est
branché.
Icemaker
Feeler Arm
Green
Power Light
Power Switch
Ice storage
bin
To remove, pull the icemaker drawer fully open
and remove the transportable ice storage bin by
lifting up and out.
NOTE: Ice can fall behind the ice storage bin.
Prior to replacing the bin, check for any fallen
ice.
If the ice storage bin is removed from the
refrigerator for an extended period of time, we
recommend setting the icemaker power switch
to O (off).
To replace, grasp the side of the right side of
the bin with the higher edge so that the angled
side is against the drawer front. Lower the bin
into place and close the drawer.
NOTICE: Failure to install properly could cause
potential damage to the icemaker.
The ice storage bin is dishwasher safe, top rack
only.
Loading ...
Loading ...
Loading ...