Loading ...
Loading ...
Loading ...
a
a
a
$a
10
Technical Data
ʠ
Dimensions (DxWxH) 60 x 60 x 85 cm (height adjustable)
Weight approx. 45 kg
Max. capacity 8 kg
Condensate container 4.2 l
Connection voltage 220-240 V
Connected load 2600 W
Fuse protection 13 A
Ambient temperature 5-35°C
Product number
Production number
Inside of door
The rating plate can be found on the back of the dryer.
Power consumption when switched off 0.10 W
Power consumption when ready for use (left-on mode) 1.00 W
ʠ
Drum interior light (depending on model): The drum lights up after the door is opened and after the
programme starts, and switches off automatically.
Consumption values table
Programme
Spin speed which
is used for spinning
the laundry
Duration** Energy consumption**
L Cottons 8 kg 4 kg 8 kg 4 kg
+. Cupboard Dry* 1400 rpm 117 min 70 min 3.97kWh 2.24 kWh
1000 rpm 137 min 82 min 4.63 kWh 2.61 kWh
800 rpm 158 min 95 min 5.29 kWh 2.98 kWh
|üIron Dry* 1400 rpm 91 min 54 min 2.86 kWh 1.61 kWh
1000 rpm 108 min 65 min 3.61 kWh 2.04 kWh
800 rpm 124 min 74 min 4.37 kWh 2.46 kWh
I Easy-Care 3.5 kg 3.5 kg
+. Cupboard Dry* 800 rpm 46 min 1.42 kWh
600 rpm 56 min 1.74 kWh
* Programme setting for testing in accordance with the applicable EN61121 standard.
** The values may differ from those specified, depending on the type of fabric, composition of laundry to be dried, residual moisture in the fabric
and the amount of laundry being loaded.
Most efficient programme for cotton fabrics
The following "standard cottons programme" (identified with ) is suitable for drying normal, wet cotton laundry and is most efficient in terms of
its combined energy consumption for drying wet cotton laundry.
Standard programme for cottons in accordance with current EU regulation 932/2012
Programme Load
Energy
consumption
Programme duration
Cottons Cupboard Dry
8 kg/4 kg 4.63 kWh/2.61 kWh 137 min/82 min
Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU.
Optional accessories (order from the after-sales service using the order number, depending on the model)
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth to save space. The dryer must be fastened
to the washing machine using this connection set. WTZ 11400: with pull-out worktop.
Platform
For easier loading and unloading. The basket contained in the drawer can be used to carry the laundry.
Wollens basket
For drying individual wollen fabrics, sports shoes and soft toys (see separate instructions for “Woollens basket”).
Connection fittings for condensation outlet
The condensation is conveyed directly via a hose.
WTZ
20410
WMZ
20500
WMZ
20600
WTZ
1110
11
What to do if ...
Turn the programme selector to Off and remove the mains plug from the socket.
ʠ
The $Start/Reload indicator
light does not light up.
Mains plug plugged in?
Programme selected?
Check the socket fuse.
ʠ
The display panel light and
indicator lights (depending on
model) go out and the
$Start/Reload indicator light
flashes.
Energy-saving mode is activated a see the separate
Energy-saving mode instructions.
ʠ
The display panel switches off. The appliance goes into the sleep mode after activating
Finished in option apage 5.
ʠ
The Í(Condensate container)
indicator light flashes.
Empty the condensate container apage 4.
Press the $Start/Reload button to reset the displayed
indication and then press the $Start/Reload button
again to restart the appliance if necessary.
If featured, check the hose for condensation outlet.
ʠ
p(Fluff filter/Heat exchanger)
indicator light flashes.
Clean the fluff filter apage 4.
Press the $Start/Reload button to reset the displayed
indication and then press the $Start/Reload button
again to restart the appliance if necessary.
Clean the heat exchanger a page 8.
ʠ
Dryer does not start. $Start/Reload button selected?
Door closed?
Programme set?
After-sales service
If you cannot rectify the fault yourself (e.g. switching off/on) aWhat to do if..., page 11/12,
please contact our after-sales service. We will always find an appropriate solution and avoid
unnecessary visits by engineers.
The contact details of your local after-sales service can be found in the enclosed after-sales
service directory.
– GB 0344 892 8979 (Calls charged at local or mobile rate)
– IE 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
Please provide the after-sales service the product number (E no.) and the production number
(FD) of the appliance.
Product number Production number
You can find this information:
inside the door* / in the opened service flap*
and on the rear of the appliance.
*depending on the model
Trust the expertise of the manufacturer. Contact us for assistance. In this way, you can rest
assured that the repair will be carried out by trained service technicians using original spare
parts.
ʠ
a
ʠ
ʠ
ʠ
a
ʠ
ʠ
a
a
aa
a
ʠ
a
a
ʠ
a
a
a
a
a
a
a
a
aa
a
a
a
Loading ...
Loading ...