Loading ...
Loading ...
Loading ...
8-Ring Maintenance
Purchasean O-Ring Repair Kit at your IocaiSearsor by caliing
1-800-4-MY-HOME(469-4663) or oniine at www.sears.com,it
is not includedwith the pressurewasher.This kit includes
replacemento-rings, rubberwasher and water inlet fiiter. Referto
tile instructionsheetprovidedin the kit to serviceyour unit's
o-rings.
WARNING
The high pressure stream of water that this
_ quipment produces can cut through skin and itsunderiying tissues, ieadingto serious injury and
)ossible amputation.
• NEVERrepairleakingconnectionswith sealantof anykind.
Replaceo-ringor seal.
Pump Oil Maintenance
DONOTattempt any oil maintenanceon this pump. This
model does not require any pump oii maintenance.The pump
is pre-iubricated and sealed from the factory, requiring no
additional lubrication for the life of the pump.
ENGINEMAINTENANCE
WARNING
-_ Unintentional sparking can result in fire or
_¢ electric shock.
WHENA#JUSTING8R _IAKINGI_EPAIRST8 YGUR
PI_ESSUREWASNER
* Disconnectthe spark plugwire from the sparkplugandplace
the wire whereit cannotcontactsparkplug.
WNENTESTINGFGRENGINESPARK
* Useapprovedsparkplug tester
, DONOTcheckfor sparkwith sparkplugremoved.
Oil
GimI_ecemmendatiens
We recommend the use of Briggs & Stratton Warranty
Certified oiis for best performance. Other higil=quality deter=
gent oiis are acceptabie if classified for service SF,SG, SH,
SJ or higher=DO NOTuse speciai additives=
Outdoor temperatures determinethe proper oii viscosity for
the engine=Usethe chart to setectthe best viscosity for the
outdoor temperature range expected.
oF
104 _ * __ ,
86 _u_
68 --w _
32
14
-4
-22
°C
2O
;I--lo
_'_ _0
* Below40% (4°C)the useof SAE30 will result in hard starting.
** Above80°F(27°C)the useof 10W30maycauseincreasedoil
consurnption.Checkoil levelmorefrequently.
NOTE:Synthetic oiI meeting iLSAC GF-2,APi certifi-
! cation mark and API service symbol with "SJ/CF
ENERGYCONSERVING"or Ngher, is an acceptable
oil at ali temperatures. Use of synthetic oil does not
alter required oil change intervals.
Checking8ii Level
OiI level should be checked prior to each use or at least every
5 hours of operation. Keepoil ievei maintained=
1. Makesure pressure washer is on a ievei surface.
2. Remove oii dipstick and wipe dipstick with cteancioth.
Reptaceand tigilten dipstick. Removeand and check oil
level.
3. Verify oii is at "Fulr' mark on dipstick. Replaceand
tigllten dipstick.
18
Loading ...
Loading ...
Loading ...