Loading ...
Loading ...
Loading ...
SET WATER LEVEL CONTROL
This control gives you the flexibility to
save water when washing small loads.
Your washer lets you select a water
setting based on the size of your wash
load.
FOB"normal loads, start with the
MEDIUM LOAD Setting. Adjust up
or down depending on your load.
Clothes should move freely and roll
tow,ard the agitator.
To change the water level setting
after the washer has started to
agitate, turn the knob to RESET,
then to the desired new setting.
f
MEDIUM
LOAD
SET WATER TEMPERATURE
CONTROL
Your washer lets you select a wash
and rinse water temperature setting
based on the type of load you are
washing.
Using warm rinse water will leave
loads dryer after the spin cycle than
if you use cold rinse water. However,
warm rinses may increase wrinkling
when line drying.
In cold climates, warm rinse water also
provides a more comfortable temperature
for handling the wash load. Warm rinse
is controlled to 75°E
WARM
COLD
HOT
COLD
WARM
WARM
COLD
COLD
AUTO
TEMPERATLIR_.
CONTROL
SMALL LARGE
LOAD LOAD
RESET
SELECTING WATER TEMPERATURES
Wash Water
Temperature Suggested Fabrics Comments
HOT Work clothes Best cleaning for heavily soiled items
F or above Sturdy whites/ Removes oils, perspiration, greasy soils
colorfast pastels and stains
Diapers Prevents graying or yellowing
WARM
I10°F
COLD*
)O°F
Dark/non-colorfast colors
Permanent press items
Nylon, polyester, acrylics,
silks, woolens
Knits/delicate fabrics
Extra-sensitive colors
Non-colorfast items
Hand washables
Best for moderately soiled to lightly soiled items
Safe for most fabric finishes
Less fading and dye bleeding
Reduces wrinkling
Best for very lightly soiled items
Saves hot water
*In wash water temperatures colder than 70°F, detergents do not dissolve well. Also, soils may
be difficult to remove and some fabrics may retain wear wrinkles and have increased pilling -
the formation of small lint-like balls on the surface of garments. Pilling is the natural result of
wearing and washing of garments.
21
Loading ...
Loading ...
Loading ...