Loading ...
Loading ...
Loading ...
8 | nuwavenow.com
Call: 877-689-2838
AUTO Mode
AUTO Mode runs the OxyPure
automatically in accordance with
the current air quality. To use it:
1. Tap AUTO/ECO once to turn on AUTO mode.
The upper half circle LED will turn on to indicate
that AUTO Mode is active.
2. The unit will operate, automatically adjusting
the Fan Speed according to current air quality,
increasing when the air is dirty, decreasing as
the air gets cleaner.
3. When you wish to deactivate AUTO Mode, sim-
ply press AUTO/ECO again. The OxyPure will
revert to manual FAN SPEED Mode and run at
the lowest fan speed.
Note
Regardless of operating mode, pressing AUTO/
ECO once will turn the mode on, and pressing it
again will turn the mode off.
AUTO and FAN SPEED
You cannot use the FAN SPEED button while in
AUTO Mode because pressing FAN SPEED in that
case will take you out of AUTO Mode and return
you to manual FAN SPEED Mode.
While in manual FAN SPEED Mode, if you press
AUTO/ECO, the OxyPure will switch to AUTO
Mode, and it will remain in AUTO Mode until
changed again.
AUTO and TIMER
While the OxyPure is running in AUTO Mode,
you can set the unit’s operating time by pressing
the TIMER button, setting a time limit of up to 12
hours.
AUTO and TURBO
You can use AUTO Mode and TURBO Mode
together, running in TURBO Mode for a time and
then switching to AUTO Mode, running at the
lowest Fan Speed. See the following page
for more information.
ECO Mode
Like AUTO Mode, ECO Mode also
responds to changes in Air Quality.
However, because it does not run the
fan continuously, ECO Mode is a real energy- and
money-saver. To use it:
1. Press and hold the AUTO/ECO button for 1
second. The OxyPure will beep, the lower half
circle LED will turn on to indicate that ECO
Mode is active while the rest of the panel goes
dark, and the fan will turn off.
2. When the air quality is bad (PM2.5 level over
50), the OxyPure will turn on automatically and
go into AUTO Mode. The Power LED will be lit
yellow, and AUTO/ECO LED will be lit white.
3. When the air quality is good (PM2.5 level
under 5), the OxyPure will automatically turn
off again.be turned off automatically.
To quit ECO Mode, press and hold AUTO/ECO
for 1 second.
FAN
SPEED
LEVEL
FAN
SPEED
RPM
AIR
QUALITY
READING
PM
SENSOR
READING
1 300 GREEN 0 ‒ 10
2 850 ORANGE 11 ‒ 30
3 1050 BURGUNDY 31 ‒ 50
4 1500 RED OVER 50
INSTRUCTIONS
MANUAL FAN SPEED MODE • TURBO MODE
Questions about your OxyPure?
Contact our friendly customer service staff from
7:30am to 4:30pm, Monday through Friday
CST, at
877-689-2838 or reach us via email anytime
Loading ...
Loading ...
Loading ...