158.120
158.12000
158.12020
15g.121
158.12250
158.12260
158.220
STRAIGHTSTITCH ATTACHMENT ZIGZAG BITE FOOTCONTROL
POSITION DIMENSION
CF._TER HIGH BAR 6.8 6811
d Sw l
BKIf:G THE ZIGZAG CAN GUIDE (l) TO ITS r,XTRE/tE LEFT L_D POSITION
bY TURNING THE HAND'EEL* AT THIS POSITION OF ZIGZAC C_M GUIDE,
MOVE THE STITCH WIDTH CON._ROL FROH O TO 4, AND THEN FROH _ TO O,
CHECKING TO(. SEE IF THE NEEDLE SW][NGS. THE NEEDLE SHOULD NOT
SWING. IF ADJUSTHENT IS NECESSARY, LOOSEN SET SCREW (2) AND
ADJUST POSITION OF THE BASE, OR BASE STOPPER (3), REPEATING THE
ABOVE PROCEDURE. TIGHTEN THE SCREW SECUItELY AFTER ADJ_STHENT.
PRESSERFOOT HEIGHT
LOW|ARTYPE
..__._13 6 MM
MINIMUM
52 MM
HIGH BARTYPE
NEEDLE PLATE SURFACE MINIMUM
62 MM
FRONTFACINGSHUTTLE
SUPER HIGH lIAR TYPE (
MINIMUM
5.2 MM
SlOE FACINGSHU'i'rLE
SUPERHIGH BAR LOW BAR HIGH BAR LOW BAR
FI €,_RF C-I
Drop feed dog Pressdownpressureregulatorto the max;mum pressureLowerpressorPfootlever LoosenIhumb soew and be
sure presser foot os seated properly Taghtenthumb screw
If adluslmenlasnecessary,raise presserloot lever and loosenscrewson pressor barholder Adlustthe hefght of p_es_effoot
from needle plate as specdled Conformthe height of pressertoot by a complete turn of the handwheel T_ghtenthe sc|ews
securelyafter adjustment
i158.18010
Loading ...
Loading ...
Loading ...
