Loading ...
Loading ...
Loading ...
Maintenance
Oven Door
Note: The oven door on a new range may feel "spongy"
when it is closed. This is normal and will decrease with LlSe.
Oven Window
To protect the oven door window:
I Do not use abrasive cleaning agents sLmhas steel wool
scouring pads or powdered cleansers as they may scratch
the glass.
2. Do not hit the glass with pots, pans, furniture, toys, or other
objects.
3. Do not close the oven door until the oven racks are in
place.
Scratching, hitting, jarring or stressing the glass may weaken
its strLmture causing an increased risk of breakage at a later
date.
Leveling Legs
Be sure the range is leveled when installed. If
the range is not level, turn the leveling legs, I 7
located at each corner of the range, until
range is level. _,,1
ANTI_BRACKET
LEVELING LEG
Electrical Connection .......
Appliances which require electrical pow__ ]
are equipped with a three-prong
grounding plug which must be plugged
directly into a properly grounded three-
hole 120 volt electrical outlet. L ]
Always disconnect power to appliance before servicing.
Tile three-prong grounding plug offers protection against
shock hazards. DO NOT CUT OR REMOVE THE THIRD
GROUNDING PRONG FROM THE POWER CORD PLUG.
If an ungrounded, two-hole or other type electrical outlet is
encountered, it is the personal responsibility of the
appliance owner to have the outlet replaced with a
properly grounded three-hole electrical outlet.
Oven Light
To replace oven light bulb:
1. When oven is cool, hold bulb cover
in place, then slide wire retainer
off cover. NOTE: Bulb cover
will fall if not held in place
while removing wire retainer.
2. Remove bulb cover and light
bulb.
BULB COVER
RE, A_NER
3. Replace with a 40-watt appliance bulb.
4. Replace bulb cover and secure with wire retainer.
5. Reconnect power to range. Reset clock.
19
8t 13p553.pdf I Imported from Cleveland on 1/t7/2007
Loading ...
Loading ...
Loading ...