Loading ...
Loading ...
Loading ...
Product Assembly
STEP 3b: Back Support Frame
Attach Back Support (5) to the Seat Slider (2) using Hex Bolt (17), two Flat Washers (10) and
Thick Nylon Nut (12). Continue to attach Back Adjuster (25) to Main Frame (1) using Hex Bolt
(13), two Flat Washers (10) and Thick Nylon Nut (12).
STEP 3b: Seat Supports
Attach two Seat Hinges (6) onto
Seat Slider (2).
TIP: Fully tighten Bolts (17) & (13),
then loosen their locking Thick Nylon
Nuts (12) approximately 1/2 turn so
that Back Support (5) & Back
Adjuster (25) pivot freely.
Please Hand Tighten All
Bolts Until End of STEP 3
STEP 3a: Seat Pad
Attach SEAT PAD (6) to the SEAT SUPPORT - Assembly (4-ASM) using:
● Two HEX BOLTS, 3/8" x 2-1/2" (12)
● Two SPRING WASHERS, 3/8" (31)
● Two FLAT WASHERS, 3/8" (13)
STEP 3b: Back Pad
Attach BACK PAD (7) to the
BACK SUPPORT - Assembly
(3-ASM) using:
● Two HEX BOLTS, 3/8" x
2-1/2" (12)
● Two SPRING WASHERS,
3/8" (31)
● Two FLAT WASHERS,
3/8" (13)
STEP 3c: “Torque Time”
Tighten all Step 3a & 3b Bolts at
this time to the Recommended
Torque Specs of 5 ft-lbs (+/- 1 lb)
5 ft-lbs
(+/- 1 lbs)
3/4 SOCKET &
6” EXTENSION
3/4 WRENCHES
Recommended Tools
9/16 SOCKET &
6” EXTENSION
9/16 WRENCHES
Recommended Tools
9/16 SOCKET &
6” EXTENSION
9/16 WRENCHES
Recommended Tools
10
Loading ...
Loading ...
Loading ...