Loading ...
Loading ...
Loading ...
MAINTENANCE SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
Check Brake Operation
Check Tire Pressure
Check Operator Presence and
T Interlock Systems
a Check for Loose Fasteners
Sharpen/Replace Mower Blades
T Lubrication Chart
0 Check Battery Level
a C_ean Battery and Terminals
Check Transoxle Cooling
Check V-Belts
Check Engine Oil Level
Change Engine Oil (with oil filter)
E Change Engine Oil (without oil fl_ter)
U Clean Air Filter
G Clean Air Screen
NI Inspect Muffler/Spark Arrester
E Replace Oil Filter (If equipped)
Clean Engine Cooling Fins
Replace Spark Plug
Replace Air Filter Paper Cartridge
Replace Fuel Filter
1 - Change more often when operating unrter a heavy load or
in high ambient temperatures.
2 - Sen/ice more often when operating in dirty or dusty conditions.
SERVICE DATES
v'
II I!
_t_ 1,2
3 - Replace blades more often when mowing in sanrty soil
4 - Not required if equipped with maintenance=free battery.
5 - Tighten front axle pivot bolt to 35 ft.-Ibo, maximum.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
LUBRICATION CHART
(_ Spindle--
to.;.-,
Zerk i_--'
_)Front Wheel ;-'
Bearing _,_
Zerk _,j_
_Engine',.-_-, '
I ,'
i I
i I
i I
i I
I • ....
/ j "I _)Front Wheel
:======' / ,_earing Zerk
",'.) i
i!
General Purpose Grease
REFER TO Maintenance "ENGINE" SECTION
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of the
self-lubricating bearings. If you feel they
must be lubricated, use only a dry, pow-
dered graphite type lubricant sparingly.
18
Loading ...
Loading ...
Loading ...