Loading ...
Loading ...
Loading ...
NOTE: MODEL 917.353770 tS
ILLUSTRATED THROUGH-
OUT THIS MANUAL WHERE
INSTRUCTIONS APPLY TO
ALL MODELS,
HAND GUARD
CHAIN
SAW
OIL
GUIDE
BAR
WRENCH
FRAM_
GUIDE /F'_
BAR //
NUTS
GUIDE BAR
CHAIN
GUIDES
FIGURE 2
FLAT
WASHER
"_" MACHtN E
SCREW
BASE
PLATE
HAND
NUT
SPRING
WASHER
WASHER
CHAIN
FIGURE 1
ASSEMBLY
YOU SHOULD HEAR A
FRAME; FUEL AND OiL
HOSES_
RATTLE INSIDE THE SAW
FILTERS ARE ON FLEXIBLE
WEAR HEAVY GLOVES WHEN HAND-
LING SAW CHAIN,
.
Identif_ยข the Saw parts (Fig, 1) as ypu remove them from
the shipping carton, NOTE: THE GUIDE BAR WRENCH
(FURNISHED WITH YOUR SAW) AND A 7/16"WRENCH
ARE THE ONLY TOOLS YOU WILL NEED TO ASSEM-
BLE AND ADJUST YOUR SAW.
2o Soak Chain in light oil for a few minutes before assembly,
-2-
INSTALLATION OF HAND GUARD
1. Remove Nut, Spring Washer and Flat Washer from Stud
in Front Handle (Fig. 2L
2_
Assemble Hand Guard over Bushing and against Flat
Washer, Next, assemble remaining Flat Washer and Spring
Washer. NOTE: CONCAVE SURFACE OF SPRING
WASHER MUST FACE FLAT WASHER. Secure with Nut.
Tighten Nut until Hand Guard is secureto handle, DO NOT
OVERTIGHTEN. Hand Guard must move easily to fill
fuel and oil tanks_
INSTALLATION OF BAR
A ND C H AIN
1o Using the Guide Bar Wrench, remove the two Guide Bar
Nuts and Outer Chain Guide from Guide Bar Studs (Fig_ 3L
2. Remove Machine Screw from Base Plate (Fig. 2).
3. Be sure upper and lower" edges of inner Chain Guide are
bent TOWARD the Saw Frame (Fig. 3). '
Loading ...
Loading ...
Loading ...