Loading ...
Loading ...
Loading ...
7
INSTALLATION INSTRUCTIONS
Please follow the installation steps below to ensure your appliance operates correctly.
1. Power
The appliance must be installed so the plug is accessible.
To ensure that the appliance is not accidentally switched off, connect your chest freezer
to its own power point. Do not plug in any other appliance at this power point or use
extension cords and double adaptors, as the combined weight of both power cords can
pull the double adaptor from a wall outlet socket.
For power requirements, refer to the information on the serial plate located externally
on the back of the appliance.
It is essential that the appliance is properly grounded (earthed).
2. Location
Your appliance should not be located in direct sunlight or next to any heat generating
appliance such as a cooktop, oven or dishwasher.
Your appliance is designed for freestanding installation only. It should not be recessed
orintegrated.
Ensure flooring is strong enough to support the product fully loaded.
3. Installation
A
Ensure flooring is level.
B
Plug the appliance into the power point and switch on.
C
Push the appliance into its final position making sure there is the correct air gap
between the product and any surrounding cabinetry or walls. See minimum clearance in
cabinetry dimensions table.
D
Check if the product is rocking or unstable. If unstable;
Measure the gap under the side that has come off the floor.
Obtain some solid packaging material (hardwood, plastic, etc) which fits firmly into
the gap.
Note: do not use metallic materials that may corrode, stain and/or damage floor coverings.
E
Pull the product out of position.
Place the packaging material in the location diagonally opposite the side that lifts off
the floor.
Make sure the packaging material stays in place when the product is pushed back
into position.
F
Push the product back into position checking alignment and lid closing action are
satisfactory.
Check that the product is stable. If not, repeat 3
D
and 3
E
.
IMPORTANT!
When moving the chest freezer never tilt it on an angle more than 45°. This could
damage the compressor and sealed system.
Loading ...
Loading ...
Loading ...