Loading ...
Loading ...
Loading ...
5
CONTROL PANEL AND FEATURES
Not all features and cycles are available on all models.
POWER
Touch to turn the dryer on and off. Touch to stop/cancel
a cycle at any time.
CYCLE CONTROL KNOB
Use your dryer’s cycle control knob to select available cycles
on your dryer. Turn the knob to select a cycle for your laundry
load. See “Cycle Guide” for detailed descriptions of cycles.
START/PAUSE
Touch and hold to start a cycle, or touch once while a cycle
is in process to pause it.
TIMED DRY ADJUST
Use “+” and “–” with Timed Cycles to increase or
decrease the length of a Timed Dry or Rapid Dry cycle.
LED DISPLAY AND SETTINGS
When you select a cycle, its default settings will light up and
the Estimated Time Remaining (for Sensor Cycles) or actual
time remaining (for Timed Cycles) will be displayed.
Touch the setting names next to the display to adjust settings.
See “Cycle Guide” for available settings on each cycle. Not all
settings are available with all cycles.
Temperature
When using Timed Cycles, you may select a dry
temperature based on the type of load you are drying.
Use the warmest setting safe for the garments in the load.
Follow garment label instructions.
NOTE: Sensor Cycles allow temperature adjustment. At
most, 3 of available temperatures (not including Air Only)
are allowed.
Dry Level
You may adjust the Dry Level on Sensor Cycles (except
for the Sanitize cycle), if desired.
NOTE: Dryness level is for use with Sensor Cycles only.
Wrinkle Prevent
If you will be unable to remove a load immediately, touch
Wrinkle Prevent to add either 60 or 150 minutes of
periodic tumbling to help reduce wrinkling.
OPTIONS
Use to select available options for your dryer. Not all cycles
and options are available on all models.
1
2
3
Drum Light
Select DRUM LIGHT to turn on the light inside the dryer
drum. When touched during a cycle, or when the dryer is
not running, the Drum Light turns on and will remain on
until DRUM LIGHT is touched again, the door is opened
and closed, a cycle is started, or the door is left open for
5 minutes.
Touch DRUM LIGHT at any time to turn the drum light on
or off.
Damp Dry Signal
Touch to set the Damp Dry Signal to ON or OFF. When
selected, a series of beeps will sound when the load is
damp but not completely dry. This will allow you to remove
clothes that do not need to dry completely. This signal can
also be used as a signal to rearrange the load when drying
bulky items that do not tumble well, such as comforters.
This option is not available on Sanitize or the Timed cycles.
Audio Level
Touch AUDIO LEVEL to change end beep and button
sounds simultaneously to Low, High, or Off.
CYCLE STATUS LIGHTS
The indicator bar on the right side of the control will let you
know what stage of the drying cycle is in process.
Sensing
The Sensing indicator will light during Sensor Cycles to
indicate that the moisture sensor on the dryer is operating.
This indicator will not light during Timed Cycles or options
such as Wrinkle Prevent.
Damp
This indicator shows that the load is partially dried and
items that you may wish to hang up or iron while still damp
may be removed.
Cool Down
The dryer has finished drying with heat and is now tumbling
the load without heat to cool it down and reduce wrinkling.
Done
This will indicate that the selected cycle has ended and the
load may be removed from the dryer. If Wrinkle Prevent has
been selected, the dryer may continue to tumble the load,
even if the Done indicator is lit.
Check Lint Screen
The Check Lint Screen indicator light will flash as a
reminder to clean the lint screen. It will flash until the door
is opened or a cycle is started. It will turn off when the
dryer is turned off.
4
NOTE: The control panel features a sensitive surface that responds to a light touch of your finger. To ensure your selections are registered,
touch the control panel with your finger tip, not your fingernail. When selecting a setting or option, simply touch its name.
3
5
6 74
5
6
7
1
2
Loading ...
Loading ...
Loading ...