Loading ...
Loading ...
Loading ...
The operate,on of any trimmer can result in
foreign objects being thrown into the
eyes,which can result in severe eye
damage. Always wear safety glassesor
eye shields while operating your trimmer
or performing any adjustmentsor repairs.
We recommenda wide vision safety mask
over spectaclesor standard safety
glasses.
HOW TO USE YOUR TRIMMER
ENGINE SPEED
TO ADJUST TRIMMING HEIGHT
A_:_CAUTION: Stop the engine and wait
for all moving parts to stop. Disconnect
spark plug wire from spark plug and
place wire where it cannot come in
contact with plug.
The height of cut can be set to six (6)
different positions ranging from 1-1/2
inches to 3 inches. Recommended cutting
height for the average yard is 2 inches.
1. To adjust trimming height, push in the
locking plate tab and move trimmer
head up or down to desired position.
2. Release tab and be sure head is
locked into one of the six (6) height
positions.
Adi
The engine speed is controlled by a Trimmer
throttle located on the side of the upper Head
handle. Fast position is for starting and
normal trimming. Slow is for light trimming Lockin(
and fuel economy. Stop is for stopping the Plate Tab
engine.
0
\
\
TRIMMER HEAD DRIVE CONTROL
Your trimmer is equipped with a trimmer
head drive control bar which will require
the operator to be positioned behind the
trimmer handle to operate the trimmer.
• Trimmer head rotation is controlled by
holding the trimmer head control bar
down to the handle.
• Trimmer head rotation will stop when
the control bar is released.
BEFORE STARTING ENGINE
ADD OIL
Your trimmer is shipped without oil in the
engine. For type and grade of oil to use,
see "ENGINE" in the Maintenance section
of this manual.
CAUTION: DO NOT overfill engine with
oil, or it will smoke on startup.
1. Be sure trimmer is level and area
around oil fill is clean.
2. Remove oil dipstick from oil fill spout.
Make sure that rim of spout is clean.
7
Loading ...
Loading ...
Loading ...