Loading ...
Loading ...
Loading ...
PMC
16
Owner’s Manual
43
Adjusting Effect Sends
The Effects page allows you to adjust each channel’s effect send level.
To adjust a channel’s effect send level:
1. Press the <EFFECTS> button. You should now be in the Effects Edit page,
indicated by the EFFECTS button LED lighting.
2. Select the channel(s) and/or group(s) which you would like to edit, using the
<CHANNEL SELECT> button(s) (the LED on the top of the selected Channel
Select button(s) will light green, indicating your selection).
3. Turn the <DATA> encoder to adjust the effect send levels of all selected
channels.
4. Repeat steps 2-3 to adjust the effect send level(s) of any other channel(s).
ACTIVATING GROUPS: To enable the Group function to adjust the effect send levels
of all channels within a group respectively, press the <GROUP> button then perform the
above steps.
Loading ...
Loading ...
Loading ...