Loading ...
Loading ...
Loading ...
Operation
Natural Mode
Sleep Mode
On/O
ON/OFF
When in standby mode, press the On/O button on either the control panel or
remote control to turn the unit ON. The On/O & fan speed indicator lights will
illuminate, and the LED Display will show the current fan speed. To turn the unit OFF,
press the On/O button again.
FAN SPEED - DIAL
When the unit is ON, rotate the dial clockwise to increase the FAN SPEED. The fan
speed setting will indicate on the LED display - a number between 1-30. 30 is the
highest speed. Rotate the dial anticlockwise to decrease the FAN SPEED.
FAN SPEED - REMOTE CONTROL
Alternatively, when the unit is ON, press the FAN SPEED increase or decrease
buttons to set the desired fan speed. The selected speed will still show on the LED
Display.
NATURAL MODE
Press this button (or the MODE button on the remote) to activate the NATURAL
MODE. The NATURAL MODE indicator light will illuminate on the control panel once
selected. When the unit is in this mode, it automatically cycles through the speeds in
pre-set intervals. The 30 speeds are divided into 3 groups. Speeds 1-10 are group 1,
speeds 11-20 are group 2, and speeds 21-30 are group 3. Refer to below:
• Group 1 (Speeds 1-10): Low Natural Breeze Mode
• Group 2 (Speeds 11-20): Middle Natural Breeze Mode
• Group 3 (Speeds 21-30): High Natural Breeze Mode
NOTE: The LED display will only show speeds 10/20/30, depending on the group
selected.
To exit NATURAL MODE, press the button again.
SLEEP MODE
Press this button (or the MODE button on the remote) to activate the SLEEP MODE.
The SLEEP MODE indicator light will illuminate on the control panel once selected.
There are 3 x dierent sleep settings depending on the FAN SPEED. Refer to below:
• High Sleeping Mode: 30 minutes High Speed + Natural Mode > 30 minutes
Middle Speed + Natural Mode > Low Speed+ Natural Mode.
• Middle Sleeping Mode: 30 minutes Middle Speed + Natural Mode > Low Speed+
Natural Mode
• Low Sleeping Mode: Low Natural Mode.
To exit SLEEP MODE, press the button again.
9
Loading ...
Loading ...
Loading ...