GE ESS25KSTISS T series Side by Side Refrigerator

Owner 's Manual and Installation Instructions - Page 13

For ESS25KSTISS. Series: T series
Also, The document are for others GE - General Electric models: ESS20KSTISS, ESS22KSTISS

PDF File Manual, 72 pages, Read Online | Download pdf file

ESS25KSTISS photo
Loading ...
Loading ...
Loading ...
Preparing to Move
Secure all loose items such as grille, shelves
and drawers by taping then_ securely in
place to prevent damage.
Be sure the refrigerator stays in an upright position
during moving.
Replacing the light bulbs.
Turning the control to the 0 position does not remove power to the light circuit.
Refrigerator Compartment--Upper Light
Thisbulb/s locatedbehind thecontrols. O
O Unl)lt]g the refrigerator.
On models with pad controls--The bull)
is located near the ui)i)e_qefl rear corner
of the compartment, behind the light
shield. Remove the light shield by sliding
it forward and out of the compartment,
On models with knob controls--To
remove the light shield, push it up
and back.
Replace the bull) with an appliance bull)
ot the same or lower wattaoe
On models with pad controls--Replace
the light shield by holding it against the
left wall and sliding up and toward the
rear wall tmtil it snaps in place.
On models with knob controls--To
replace the light shield, position the
plastic hooks on the light shield so
they fit into the holes on the back
of the control ai'ea,
Plug the refl'igerator back in.
Refrigerator Compartment--Lower Light (onsomemodels)
This//_Tht is located above the top drawer.
Unplug the refl'igerator.
@Grasp the lip at the bottom of the light
shield and pull it up and fro'ward.
0 After rei)lacin,,_ >Ath an appliance bulb
of the same or lo_er _attage, replace
the shield.
O Plug the refrigerator back in.
Freezer Compartment
O Unplug the refrigerator.
@ Remove the shelfjtlst below the light
shield. (The shelf will be easier to
remove if it is emptied first.)
i,ifl up on the light shield to relnove.
O After rei_lacino_ with an appliance bull) of
the same or lower wattage, reinstall the
shield b) hanging it from the three tabs.
0 Reinstall the shelf and plug the
refrigerator back in.
Dispenser
0 UnI)lug the refl'igerator.
The bull) is located on the dispenser
under the control panel. Remove the
light bull) by tm'ning it cotmterclockwise.
0 Replace the bull) with a bull) of the same
size and watta *e
Plug the refrigerator back in.
13
Loading ...
Loading ...
Loading ...