Loading ...
Loading ...
Loading ...
8
CHIMNEY INSTALLATION – remove the plastic. Be careful of sharp edges.
1. Carefully slide the stainless steel chimney down to the chimney bottom
and then place the chimney bottom into the recessed area on top of the
hood.
2. Secure the chimney mounting bracket to the wall in the top corner using
(2) ST 4.2 x 30mm mounting screws and dry anchors.
3. Raise the chimney top until its holes align with holes in the chimney
mounting bracket located on the wall.
4. Level the hood and secure the chimney with 2 chimney bracket screws.
NOTE:
Make sure that the correct wall plugs are used to suit your wall.
Range hoods are subject to vibration and mounting must be very secure.
The plugs included suit most walls but check first. An unreinforced Gyprock
style wall is no acceptable as a secure surface. It must be reinforced first.
Loading ...
Loading ...
Loading ...