Loading ...
Loading ...
Loading ...
Door Removal instructions
Hinge
TO DISCONNECT
1 Pres_ outer sleeve
tOWa_'d CO_neCtO_
2 Pull to remove tube
TO CONNECT
bob Necessor /
Phillio! r_eao
3/8"
Fixed
Wrench
DOOR REMOVAL INSTRUCTIONS:
If it is necessary to move the refrigerator through narrow doorways, fo#ow
these steps to remove the doors.
iMPORTANT: Before you beg_n,remove electrical power cord from wall
outleL Remove any food from door shelves.
Disconnect electrical supply.
2. Open both doors, then remove toe grille tsee page 4 to learn how).
3. Close doors.
To Remove Refrigerator Door:
1. Remove top hinge cover screw on refrigerator door and remove cover.
2. Trace around hinge _ith soft lead pencil. This will make it easier to realign
doors when they are replaced
3. Remove top hinge and lift refrigerator door off bottom hinge pin. Set door
aside.
4. Remove bottom h_nge,if necessary.
5. Reverse th_ssrocedure to reinstall refrigerator door.
To Remove Freezer Door:
1. Disconnect water line coming from lower hinge of freezer door at connection
located under front of freezer: Press outer ring against face offitting, then pull
to remove tube.
2. Remove top hinge cover screw on freezer door and remove cover.
3. Disconnect wiring harness connector plug at top hinge: place your thumbs on
flat sides of each connector and bend both parts back and forth, then with
firm grasp, pull both pieces apad
4. Trace around hinge with soft lead pencil. This will make it easier to realign
doors when they are replaced
5. Remove top hinge,allowing wiring harness to pull through hinge and lift freezer
door off of bottom hinge pin. Laydoor down flatto avoid kinkingwater line.
6. Remove bottom hinge, if necessary.
7. Reverse this procedure to reinstall freezer door.
When both doors have been reinstalled connect water line by inserting tube and
push_ng until mark touches face of fitting, replace toe grille and plug in electrical
power cord.
Loading ...
Loading ...
Loading ...