MONOPRICE
2-Port DisplayPort 1.2 to HDMI® Multi-Stream Transport (MST) Hub
P/N 21974
Quick Start Guide
INTRODUCTION
This DisplayPort to HDMI® Multi-Stream Transport Hub allows you to distribute a single DisplayPort
source to two HDMI displays. You can mirror a single video stream to both displays or configure
your PC to output multiple video streams over the single DisplayPort output to increase your
desktop area. It supports video resolutions up to 4K@30Hz for a single stream, which can be
mirrored to both displays, or 4K@30Hz for two streams. It is fully compliant with the DisplayPort 1.2
specification and is backwards compatible with all previous specifications.
PACKAGE CONTENTS
1x 1x2 DisplayPort to HDMI Multi-Stream Transport Hub
1x Quick Start Guide
INSTALLATION
1. Ensure that all equipment to be connected is powered off and unplugged from its power
source.
2. Using a High Speed HDMI Cable, plug one end into the input on your display, then plug the
other end into one of the outputs on the hub. Repeat for the other display.
3. Plug the hub into the DisplayPort output of your computer or other source device.
4. Plug in and power on all connected devices. Start video playback on your source device,
then verify that you can see the video on both displays.
HDMI®, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.