Loading ...
Loading ...
Loading ...
HOWTO USE 31
Automatic Icemaker
* Depending on the model, some of the
following functions may not be available.
Ice is made in the automatic icemaker and sent
to the dispenser. The icemaker will produce
70-182 cubes in a 24-hour period, depending
on freezer compartment temperature, room
temperature, number of door openings and
other operating conditions.
• It takes about 12 to 24 hours for a newly
installed refrigerator to begin making ice. Wait
72 hours for full ice production to occur.
• Ice making stops when the in-door ice bin
is full. When full, the in-door ice bin holds
approximately 6 to 8 (12~16 oz or 340~455 cc)
glasses of ice.
• The water pressure must be 20~120 psi or
138~827 kPa or 1.4~8.4 kgf/cm 2on models
without a water filter and 40~120 psi or
276~827 kPa or 2.8~8.4 kgf/cm 2on models
with a water filter to produce the normal
amount and size of ice cubes.
• Foreign substances or frost on the ice-
detecting sensor can interrupt ice production.
Make sure the sensor area is clean at all times
for proper operation.
F_ WARNING
Personal Injury Hazard
DO NOT ptace fingers or hands on the
automatic ice making mechanism while the
refrigerator is plugged in.
Icemaker
............,ce-=e "" U l!iiiiiiii
Sensor
Water {ills the ice tray.
1 hour later from
supplying water
Tiltin
60 minutes after water has been added
to the ice tray, the ice tray will sit slightly
tilted to hetp the cold air reach the ice.
The ice-detecting sensors will sense
when the ice is ready to be dumped
into the ice bin.
Turning the Automatic Icemaker
On or Off
To turn off the automatic icemaker, set the
icemaker switch to OFF (0). To turn on the
automatic icemaker, set the switch to ON (I).
Loading ...
Loading ...
Loading ...