Loading ...
Loading ...
Loading ...
CLOCK:
1_ Press CLOCK The word "TIME" will flash in the
display.
2o Press the UP or DOWN arrow pad to set the time.
Press and release for slow changes_ Hold for last
changes°
*Note: The itime of day cannot be changed during
an active TIMED BAKE CYCLE,
You can display the time of day at any time during oven
operations by pressing CLOCK. See Fig. t.
TIMER:
*Hole: The timer does not contro_ oven opera-
tions. The maximum time setting is 9 hours and
55 rninu_es.
1. Press TIMER. "TIMER" will flash in display
2. Press and release the UP arrow pad for slow changes
in time. Hold down for fast changes in time.
Displays ten seconds
Fig° 1
Fig° 2
The TIMER display will increase as follows:
:t0
t :00
I HR:00
Displays one minute: zero seconds
TEH SECONDS SEE FIG= 2
ONE MINUTE SEE FIG. 3
ONE HOUR SEE FIIG, 4
Fig,, 3
When the timer reaches 1 hour, the display will change.
"HR" will appear in the display_ Hours:Minutes will be
displayed. See Fig. 4.
Note: Press and release OR hold the DOWN arrow pad
to decrease time_
TO RESET TiIMER:
"TIMER" will stop flashing and the TIMER will start
counting down a few seconds after you stop using
up or down. If you pause while selecting the time and
the TIMER activates, press TIMER again and continue
to set the time,
TO CANCEL TIMER:
After TIMER begins to count down, press and hold
TIMER in at least four (4) seconds until "TIMER" quits
flashing.
BROIL:
1. Press E_RO_L. "B_oi_" wil! flash and (- - -) will
appear in display.
2. Select LO Broi_ by pressing the UP arrow padone
time. Select H_ Bro_I by pressing the UP arrow pad
twice. To change from Hi Bro[tl to LO Broil, press
the DOWN arrow pad
*Note: You cannot set a Delayed Broil Cycle.
After Broil is finished, press CLEAR/OFF
To reset BROIL, repeat Steps 1-2
Displays one hour: zero minutes
Fig. 4
NOTE: Press ='CLOCK=" or "TIMER" tO stop the End-
of-Cycle tone.
PRESS ONCE PRESS
TO SET LOW TWICE TO
BROIL SET HI BROIL
Fig, 5
BROIL PAD
NCCTL05-2
Loading ...
Loading ...
Loading ...