Loading ...
Loading ...
Loading ...
Even-Cook.
Convection Oven
Speed Oven Timer
clean light o./off
Clean Bake Start Broil Bake Keep
time time warm
maxx Clock _ Cony Cony
clean Lock convert bake
Controls
Cony Favorite
roast setting
1 2 3
4 5 6
7 8 9
Clear 0 0
Off
Setting the Clock
The CLOCK _0_ pad is used to set the clock. The clock may be
set for 12 or 24 hour time of day operation. The clock has been
preset at the factory for the 12 hour operation. When the range is
first plugged in, or when the power supply to the range has been
interrupted, the timer in the display will flash with power failure "PF"
(See Fig. 1).
INSTRUCTIONS
To set the clock (example below for 1:30):
1. Press _. "CLO" will appear in the display (Fig. 2).
2. Press @ @ @ pads to set the time of day to l:3O(gig. 3).
"CLO" will appear in the display. Press e). "CLO" will
disappear and the clock will start (Fig. 4).
Changing between 12 or 24 hour time of day display:
1. Press and hold _ for 6 seconds (Fig. 3). While holding the
pad down the current time of day will remain and "CLO" will
disappear from the display (Fig. 4). CONTINUE holding the pad
until a beep is heard.
2. The display will show either "12Hr"(Fig. 5) or "24Hr"(Fig. 6).
3. Press @ to switch between the 12 and 24 hour time of day
display. The display will show either "12Hr" (Fig. 5) or "24Hr"
(Fig. 6).
4. Press 40 to accept the desired change or press @ to reject
the change.
5. Reset the correct time as described in To set the Clock above.
Please note that if the 24 hour time of day mode was chosen,
the clock will now display time from O:OOthrough 23:59 hours.
PRESS
O
_for 6 seconds
G
Fig. 1
DISPLAY
12
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Loading ...
Loading ...
Loading ...