Loading ...
Loading ...
Loading ...
www.lecavist.com
4. TECHNICAL DATA SHEET
Product model
Voltage/frequency
Refrigerant/weight
Effective volume
Loading capacity
Net weight
Unit dimension (WxDxH)
Packing dimension
(WxDxH)
LCS140VN2Z2D
220-240VAC, 50Hz
R600a/65g
438 L
157 bottles
115kg
595×680×1870mm
645×745×1920mm
The written temperatures may vary slightly depending on
whether or not the interior bulb is ON or OFF or whether
the bottles are located on the upper/middle or
lower section.
The Wine cooler should be placed in where the
ambient temperature is between 16-35°C.If the
ambient temperature is above or below this range,
the performance of theunit may be affected.
For example, placing your unit in extreme cold or
hot conditions maycause interior temperatures
to fluctuate.
To turn the appliance on or off, press the
ON/OFF button.
ON/OFF Power
You can turn the interior light ON or OFF by pushing the
button marked with the “bulb” symbol. The light will be
turned off automatically if it remains ON for 10 minutes.
You have to push the button marked with the “bulb” symbol
again and the light will turn back on. For best storage
of wine, keep the light off except when viewing.
If the unit is unplugged, turned off or if there is a
power failure, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this
time delay, the Wine Cooler will not start working.
When you use the Wine Cooler for the first time, or
restart the Wine Cooler after having been shut off for
a long time, there could be a few degrees variance
between the temperature you select and the one
indicated on the LED readout. This is normal and is
due to the length of the inactivation time. Once the
Wine Cooler is running for a few hours everything
will be back to normal.
Interior Light
NOTE:
Indicator light illuminates to signify the
cooling mode is currently in operation.
Cooling
Each cooling compartment of the Wine Cooler (upper
and lower) is independently controlled.
To set the temperature:
Connect the power cord to a properly grounded outlet.
In the event of a power interruption, all previous temperature
settings are automatically erased and each compartment will
default to a preset temperature setting of : 5°C for upper c
ompartment and 12°C for lower compartment.
Set the desired cooling temperature by pressing the corres-
ponding buttons for “set upper / set lower” program. Each
depression of the buttons will scroll through the available
temperature settings (for each compartment) in reduction
of 1 degree. The temperature selected will flash in the LED
display for approximately 5seconds, then revert back to
display the temperature of the internal cooler.
Setting the temperature Control
Recommended temperatures for Chilling Wine The controls of your wine cooler
Red Wines: 15-18°C (59-64.4°F)
Dry /White Wines: 9-14°C (48.2-57.2°F)
Sparkling Wine: 5-8°C (41-46.4°F)
5
5. OPERATING YOUR WINE COOLER
The temperature setting can be adjusted
from 3°C to 20°C.
Upper compartment :
The temperature setting can be adjusted
from 3°C to 20°C.
To view the “set” temperature (anytime)
press one time, the “set” temperature will
temporarily “flash” in the LED display for
5 seconds.
This unit has the option to display
temperatures in either Celsius or Fahrenheit.
To change the setting, press and hold both
buttons (Set Upper/Set Lower) simultaneously
for approximately 5 seconds,
Lower compartment :
Loading ...
Loading ...
Loading ...