Loading ...
Loading ...
Loading ...
49-4000042 Rev 4 9
USING THE DISHWASHER
Getting Started
Start Dishwasher
Start Press the Start pad and close the door within 4 seconds to start the cycle or begin the Delay
Hours/Delay countdown. The wash cycle will begin shortly after closing the door. The display
will turn off if the door remains open for two minutes. To activate the display, close and open the
door or press any pad.
Interrupt or
Pause
To interrupt or pause a dish cycle, slowly open the door. Opening the door will cause the wash
cycle to pause. The dishwasher will beep every minute to remind you to close the door. To restart
or resume the cycle, press Start, and close the door within 4 seconds.
Cancel To cancel a wash cycle, press and hold the Start pad for 3 seconds and close door.
The dishwasher will drain, emit a beep sound, and the wash cycle light will turn OFF.
6
Cycle Indicator Lights and Sounds
Sanitized
or Cycle
Sanitized
Displayed at end of the cycle when Wash Temp Sani/Sanitize Temp/Presoak+Sani has been
selected and dishwasher has met requirements for sanitization. See Wash Temp Sani/Sanitize
Temp/Presoak+Sani, for complete description. Closing door or pressing any pad will turn off
light.
Clean
or Cycle
Complete
Displayed when a wash cycle is complete. The light stays ON as a reminder that the dishes are
clean. The light will turn off when the door is opened.
Low Rinse
Aid
(on some
models)
Displayed when rinse agent is low or empty. See Use a Rinse Agent section. To turn indicator
off, press the Pre-Soak or Steam pad 5 times within 5 seconds. Repeat this process to turn the
Low Rinse Aid indicator back on.
Cycle
Status
(on some
models)
The indicator light on the door front will change color to indicate the wash status. During the
wash cycle, the indicator light will be amber or white depending on the model. When the wash
cycle is complete, the light will change to green.
Sounds The dishwasher will emit a sound to indicate cycle completion, pad presses, and door ajar. To
mute all sounds, press the Heated Dry/Dry or Ultra Dry pad 5 times within 5 seconds. Repeat
this process to turn sounds back on.
Mute To turn the dishwasher control sounds ON/OFF, press the Heated Dry/Dry or Ultra Dry pad 5
times within 5 seconds.
Sabbath/
Door
Wake Up
Mode
(on some
models)
To turn this option ON/OFF, press and hold the Start/AutoSense/Auto and Wash Temp/Hi
Temp Wash/Wash Temp Boost pads for 5 seconds, close the door and wait 3 minutes for the
dishwasher to go into sleep mode. In the OFF mode, the control display, control sounds, and
interior lights (on some models) will not respond to the door opening/closing. This mode can be
used when observing certain religious holidays such as the Sabbath. To activate the control and
interior lights (on some models), press any pad.
7
Loading ...
Loading ...
Loading ...