Loading ...
Loading ...
Loading ...
11
ASSEMBLY & INSTALLATION
Before connecting the appliance to a power source, let it stand
upright for approximately 24 hours. This will reduce the possibility
of a malfunction in the cooling system from handling during
transportation.
This beverage fridge is a freestanding unit and should not be built into
surrounding cabinetry. Allow for proper air clearance around the fridge. The
recommended clearances are as follows:
Sides: 4.5”
Top: 4”
Back: 4”
Before operating your beverage fridge for the first time, follow these steps:
1. Allow the unit to sit upright for 24 hours prior to first use. Upon the
first use, allow the unit to sit at the desired temperature for at least 30
minutes before changing settings or filling it with drinks.
2. Clean the interior surface of the unit with warm water and a soft cloth.
3. Handle the unit with care. Do not apply force to any parts, such as the
condenser or the door. The metal rails on the bottom of the unit may
be sharp, so please use caution when moving the unit. Do not tilt the
unit beyond 45 degrees or drag it across the floor.
4. Place the fridge on a level surface that will be strong enough to
support the unit when it is fully loaded. To level your fridge, adjust the
front feet located at the bottom of the unit. If the unit is not level, the
doors and magnetic seal may not work properly. (Please note that
placing your fridge on carpet may result in expelled heat fading the
carpet.)
5. Install the fridge away from direct sunlight and heat sources such as
stoves, heaters, or radiators. Direct sunlight may affect the unit’s
acrylic coating, and nearby heat sources can increase electrical
consumption. Extreme cold or hot ambient temperatures may also
prevent optimal performance.
Loading ...
Loading ...
Loading ...