Loading ...
Loading ...
Loading ...
F50F AND F3OOE ELECTRONIC AIR CLEANERS
GETTINGTHEMOSTFROMYOURELECTRONICAIR
CLEANER
Run the
electronic air
cleaner as
much as
possible
Keep the
cell(s) and
prefilter(s)
clean
Replacepost-
prefilter
regularly
For greatest efficiency, the air cleaner should run all the time. To
do this, set the Fan switch on your thermostat to On, and make
sure the air cleaner is turned on. The fan and air cleaner run
even when the furnace or air conditioner is off.
NOTE: A manual fan switch may be built into the furnace or
furnace fan controller.
The air cleaner uses less power than a 40 watt light bulb (two-
cell model--33 watts; single cell model--22 watts). Many
believe that the added cost is more than offset by the added
benefits of full-time air cleaning and full-time air circulation. And
you may feel that the room temperature stays more even when
the fan is always on.
Even if your thermostat does not have a Fan On position, you
can obtain maximum available air cleaning benefit by making
sure the air cleaner is always turn to On so it operates
whenever the furnace or air conditioner is on.
Although the air cleaner is designed to be efficient over a wide
range of cell dirt loading conditions, regular cleaning is your
best assurance of consistent performance. Also, a very dirty
prefilter and cell reduces air flow and, in turn, this reduces the
efficiency of the furnace or air conditioner. The cell wash
reminder schedule or the optional W8600 Air Cleaner Indicator
should be used to maintain a regular wash schedule.
A high-efficiency postfilter is sometimes installed in the air
cleaner. This filter increases the efficiency of the air cleaner and
should be changed every six months of usage.
69-0756-4 4
Loading ...
Loading ...
Loading ...