Sunnydaze QC-236 Grotto Falls Outdoor Water Fountain with LED Lights - Small Polyresin Zen Waterfall Feature for Lawn, Garden or Patio - Corded Electric - 24-Inch

User Manual - Page 2

For QC-236.

PDF File Manual, 2 pages, Read Online | Download pdf file

QC-236 photo
Loading ...
GPF180100 Page 2 / 212/2019
USE & CARE
For outdoor use only.
The lighting feature of this fountain is optional. To turn the lights off, simply unplug the 2-prong power cord.
Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as
it will burn out the motor.
Only use water in this fountain. Distilled water will help prevent mineral buildup but is not required, avoid heavily
chlorinated tap water as it may damage the fountain or pump.
Periodically change the water to reduce scale and buildup — clean the fountain and pump regularly for optimal
performance and appearance.
DO NOT use harmful additives such as bleach, chlorine, etc.
DO NOT use a pressure washer or abrasive materials to wash the fountain.
Always shut off the power supply before cleaning and maintaining the fountain and the recirculating pump.
Take care when handling the pump; only pick it up by the body of the pump, never by the power cord.
During freezing temperatures, drain the fountain, disconnect the pump and store indoors; allowing ice to form may
crack the fountain and will damage the pump.

IMPORTANT INFORMATION
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage



TROUBLESHOOTING
Ensure that the pump is fully submerged and add water to the reservoir if necessary.
Check the pump and tubing for obstructions.
Check the flow control on the body of the pump as it may need to be adjusted to achieve the desired flow rate.
If lights are not working, ensure the cables are fully connected and the plastic collars are adequately tightened
(do not over-tighten the collars).
If water is not flowing within several moments of the fountain being plugged in, the pump may have trapped air
which can prevent water from circulating properly. Simply unplug the power supply for a few moments and plug it
back in.
Some splashing is normal; adjust the flow rate on the pump if the water rate is too high.
Check to make sure the power outlet is working; if in doubt about electrical connections, consult a certified electrician.
If you are still experiencing issues, please contact our customer service team through one of the methods mentioned
at the top of page 1. To expedite response time, please have the item number and order information available.