Loading ...
Loading ...
Loading ...
EN-5
EN
Use
3 Use
3.1 How to remove the blade
assembly (Fig. B)
• Take hold of the handle (9) and lift the
blender jug. Remove the lid (2) from the
blender jug and the measuring cup (1)
from the lid.
• Turn the jug upside down and place it on
a flat surface. Insert the open end of the
measuring cup (1) into the base of the
blade assembly.
• Unscrew the blade assembly (4) from
the jug body, turning the measuring cup
(1) anti-clockwise. Remove the blade
assembly (4) from the jug body using
your hand.
• Wash the components as indicated in
section “4 Cleaning and care”.
• Thoroughly dry all the components as
indicated in section “4 Cleaning and
care” and put the blade assembly back
into the jug body following the procedure
indicated previously in the reverse order.
Make sure to insert the blade assembly
until it locks into place.
3.2 Using the blender
(Fig. C)
• Insert the blender jug onto the motor
base.
• Introduce the ingredients into the jug,
paying attention not to exceed the
maximum capacity (1.5 l - 6 cups).
• Position the lid (2) with the measuring cup
(1) fitted onto the blender jug. Ensure the
lid is firm.
• Insert the plug of the blender into the
power socket. The red LED will turn on to
indicate the presence of power.
• Use the control knob (7) to select the
required speed or one of the pre-set
programs. The product can also be
operated manually by pressing the
PULSE button.
The PULSE button can be used
alone or in combination with
speeds 1 and 3 to reach the
maximum speed.
• Press the START button to
start blending. See the table
“3.4 Speed setting suggestions” for
further information on which speed is
more suitable.
Speeds 1 - 4 allow continuous
blending. You can stop the
operation pressing the STOP
button.
The speed can be changed at any
time during the blending process.
Important
• Do not operate at speeds 1-4
for more than one minute at a
time.
• When the blender jug is filled
up to or near the maximum
capacity, place one hand
on the blender lid to avoid
displacement of the lid during
operation.
• You can add further ingredients whilst
blending by removing the measuring cup
and pouring ingredients through the hole
in the lid.
Loading ...
Loading ...
Loading ...