Loading ...
Loading ...
Loading ...
This Owner's Guide provides specific operating
instructions for your model Use the refrigerator onUyas
instructed in this Use & Care Manual Before starting the
refrigerator, fol[ow these important first steps.
LOCATION
Choose a pUacethat is near a grounded eUectrbaUoutbt.
Do Not use an extension cord or an adapter pUug.
ff possibb, pUacethe refrigerator out of direct sunlight
and away from the range, dishwasher or other heat
sources,
The refrigerator must be installed on a floor that is bveU
and strong enough to support a fully loaded refrigerator.
Consider water supply availability for models equipped
with an automatic ice maker.
[NSTALLATION
DO Not install the refrigerator wher e
the temperature will drop below 55°F (13°C} or rise
above 11O0F(43QC). The compressor wi[I not be able
DoNot b oCkthetoegr!Heonthe
lower front of your refr!gerator. Sufficient air Circulation
is essent!a[ for the proper operation of your
refrigerator.
Installation Clearances
o Allow the following clearances for ease of installation
proper air circulation, and plumbing and electrical
connections:
Sides & Top 3/8"
Back 1"
DOOR OPENING
NOTE: tf yeu refrigerator is piaced with the door hinge
side against a wa!!, you may have to allow additiona[
space so the door can be opened wider.
Your refrigerator should be positioned to allow easy access
to a counter when removing food. For best use of drawers
and freezer baskets, the refrigerator should be in a
position where both the refrigerator and freezer doors can
be fully opened.
TOE GRILLE INSTALLATION / REMOVAL
To Remove Toe Grife:
1, Open freezer and fresh food compartment doors,
2, Working from leftside of toe grille, slip your fingers between
top of toe grilleandcabinet, Gently pullforward untilfirst set of
tabs arefree, Slide your hand down pastthe free tabs and pull
forward again until the second set of tabs are free, Continue
this process until all tabs are free and the toe grille can be
removed, (See graphic at top of page in right column,)
To Install Toe Grille:
1. Open freezer and
fresh food
compartment doors.
2. Line up toe grille at
base of refrigerator,
making sure the four
bottom tabs are
resting through hobs
at base of cabinet.
8. Starting from left side
of toe grille, press in on first top tab using your thumb
and push toe grille forward until it snaps in place. Continue
this process until all tabs aresnapped in place and toe
grille is secured to refrigerator.
Ail four corners of your refrigerator must rest firmly on a
solid floor.Your refrigerator is equipped with adjustable _::
front rollers to help level your unit. To ensure proper door
sealandassistdoorclosing,therefrigeratorshouldbe
tilted 1/4" (6 mm), front to back. !i@
ToLevelYo.rRefrigerator: @
1. Remove toe grille. (See "To Remove Toe Grille".)
2. Use fiat-blade screwdriver or 3/8" socket wrench
to adjust front rollers.
Raise
3. Check both doors to be sure seals touch cabinet on all
four sides.
Loading ...
Loading ...
Loading ...