Loading ...
Loading ...
Loading ...
A., i t,_e616_,MiJ_is** i iw,,A,,_
The Permanent Press settings are intended to be
used with permanent press items and items
made from cotton, synthetic or blended fabdcs
and outer garments, such as:
<) Dress shirts
€ Dress pants
€ Poly/cotton blend clothing
Clothes requiring a special tumble sequence
and spin speed to minimize wrinkling.
, Delicates
The Delicates settings are intended for use with
delicate easy care items made from cotton,
synthetic or blended fabdcs and curtains. During
these cycles, no spinning takes place between
the rinsing cycles.
4, Hand Washables
The Hand W_shables settings are intended for
very delicate "easy care items that usually require
hand washing. These cycles have been
specifically designed to provide extremely gentle
treatment of fabrics. All woolens or other, items
marked with the "Hand Wash_symbol, _, on the
care label can be safely washed in this cycle.
5 Wash Temperature Settings
The numbers 5-thru-1 associated with the
STANDARD WASH CYCLES provide a reference to
the wash temperatures available:
Power Terop Boost (5) - 161"F (71"C)
This is the highest temperature setting. The water
temperature is raised to approximately 161"F (71"C).
Temperature Boost (4) - 140"F (6O'C|
Hot (3) - 122"F (50"C)
Warm (2) - 95"F (35"C).
Cold (1) - 60"F (15"C).
Numbers 6-thru-11
The numbers 6-thru-11 are explained below in the
section titled SPECIAL CYCLES.
IV. Use the Spin Speed Selector, see Figure 10,
to set the speed desired.
SPIN SPEED SELECTION
The spin speed selector knob provides an easy
method of selecting the drum spin speeds, Interval
Spin or No Finat Spin.
L.____ mlN_| Ltw_am h==l
1Nuh HOU_ =t,mt#= zwae=
I
I • °
i
--- _ i ! !
i i
tieFI_= 1200
Figure 10.
NORMAL (straight up) Position
The NORMAL position is the straight up position.
When set at the NORMAL position the maximum spin
speed wilt not exceed the values shown in table 3. tt
is possible to set the spin speed to a lower level than
shown in table 3 to limit the speed; for example, in
cases where very delicate items are being washed.
Maximum Spin Speed
Cycle Normal INTERVAL SPIN
Regular/Cottons
Permanent Press &
Hand Washables
Oelicates
Spin & Rinse/Spin
Soft Rinse &
Soft Rinse/Spin
1200 800
800 800
600 600
1200 800
800 800
Table 3.
Note: One of the features of Sensotronlc Plus is
the sensing of unbalanced loads. If
Sensotronic Plus detects an unbalanced load
it will automatically interrupt the spin cycle to
redistribute the clothes. If the load cannot be
distributed evenly, the maximum spin speed
will automatically be reduced.
Interval Spin
When set for INTERVAL SPIN the wash is spun more
gently and loosened in several stages. In INTERVAL
SPIN cycle, time will be extended for up to 10
minutes. Maximum spin speeds of cycles when spin
is set for INTERVAL SPIN are also shown in Table 3,
above.
11
Loading ...
Loading ...
Loading ...