Loading ...
Loading ...
Loading ...
20
5. Disconnect your tablet from the console if
desired.
To disconnect your tablet from the console, first
select the disconnect option in the iFit–Smart
Cardio Equipment app. Then, press and hold the
iFit Sync button on the console until the LED on the
console turns solid green.
Note: All Bluetooth connections between the con-
sole and other devices (including any tablets, heart
rate monitors, and so forth) will be disconnected.
HOW TO CONNECT YOUR HEART RATE MONITOR
TO THE CONSOLE
The console is compatible with all Bluetooth Smart
heart rate monitors.
To connect your Bluetooth Smart heart rate monitor to
the console, press the iFit Sync button on the console;
the console pairing number will appear in the display.
When a connection is established, the LED on the
console will flash red twice.
Note: If there is more than one compatible heart rate
monitor near the console, the console will connect to
the heart rate monitor with the strongest signal.
To disconnect your heart rate monitor from the console,
press and hold the iFit Sync button on the console until
the LED on the console turns solid green.
Note: All Bluetooth connections between the console
and other devices (including any tablets, heart rate
monitors, and so forth) will be disconnected.
HOW TO USE THE SOUND SYSTEM
To play music or audio books through the console
sound system while you exercise, plug a 3.5 mm male
to 3.5 mm male audio cable (not included) into the
jack on the console and into a jack on your personal
audio player; make sure that the audio cable is fully
plugged in. Note: To purchase an audio cable, see
your local electronics store.
Next, press the play button on
your personal audio player. Adjust
the volume level using the volume
increase and decrease buttons
on the console or the volume control on your personal
audio player.
HOW TO CONNECT TO THE SOUND SYSTEM WITH
BLUETOOTH
If desired, you can connect your smart device to the
console sound system with Bluetooth.
First, make sure that the Bluetooth option is enabled
on your device.
Next, place or hold your device
near the console. Then, pair your
device to the console as follows:
Press and hold the Audio button
on the console for 3 seconds; the console will enter
pairing mode.
When your device and the console pair successfully,
the audio from your device will play through the con-
sole sound system.
The console can save 8 devices in its memory. If you
have previously paired your device to the console,
simply press the Audio button to connect your device to
the console.
You can erase devices from the console memory if
necessary. To erase all the Bluetooth-enabled devices
saved in the console memory, press and hold the Audio
button for 10 seconds.
Loading ...
Loading ...
Loading ...