Loading ...
Loading ...
3
IMPORTANT:
• After the washer basket lls to the selected water level, the lid must be closed before the wash cycle can start. If lling stops with
the lid open, close lid and press START button.
• After pausing and opening the lid, the lid must be closed and the START button pressed again.
Sounds
At different stages of the wash cycle, you may hear
sounds and pauses that are different from those of your
previous washer. For example, you may hear a clicking
and hum at the beginning of the cycle as the lid lock
goes through a self-test. There will be different kinds
of humming and whirring sounds as the agitator tests
for load balance or moves the load. And, sometimes,
you may hear nothing at all as the washer allows time
for clothes to soak.
Progressive Spray Rinse
Select cycles default to a progressive spray rinse. During
these cycles, you will hear water enter the washer as the
tub spins, allowing the rinse water to penetrate clothes.
Check the “Cycle Guide” for details.
What’s New Under the Lid?
Your new washer will operate differently than your past agitator-style washer.
Lid Lock
When this light is blinking, the washer is paused or
preparing to lock. When this light is blinking or off, the lid
can be opened. After a cycle is started, water will enter
washer and then lock. To allow for higher spin speeds, the
lid will lock and the Lid Locked light will turn on and remain
lit. When the lid locks and you need to add a garment, the
lid can only be opened by pressing START and waiting
for it to unlock. The lid will only unlock after wash basket
movement has stopped. Depending on when in the cycle
you try to pause, it may take 3 seconds to a few minutes
for the lid to unlock. Press START to resume the cycle.
Sensing
At the beginning of the cycle, the washer will perform a
series of spins to check for load balance. During this time,
a series of clicks and a whirring noise signal that sensing
technology is determining if there is an off-balance load.
It is recommended to wait until after the sensing load light
goes out before pausing the cycle.
Model and Serial Number Location
Model and serial
number plate
For future reference, please record the numbers below:
Model Number ___________________________________________
Serial Number ___________________________________________
Key Code Number _______________________________________
Loading ...
Loading ...
Loading ...