Loading ...
Loading ...
CIRCUIT DIAGRAM
S1 - Micro-switch
SA - Overheat switch
EH - Heater element
HL 1 - Power-on indicator
HL 2 - Heater-on cycling indicator
SB - Temperature regulator
E
-
Ground connection
NOTE: THE CIRCUITS OF THE TWO FRYERS ARE IDENTICAL. THE DIFFERENCE IS THAT THE TWO
TANK FRYER HAS TWO SEPARATE ELECTRICAL UNIT BOXES AND RECEPTICLES.
TROUBLESHOOTING - Troubles listed are for reference. If any fault occurs, please discontinue use. Do not attempt to
repair yourself. This will void the warranty.
Problem
Cause
Solution
Not working as well as
expected
Unit is not on a dedicated circuit
Unplug unit, plug into a dedicated line and
retry
Basket is overloaded
Too much product will bring down the
temperature of the oil bringing it to a boil
rather than a frying temperature. Use less
product.
Stopped working
Reset button was tripped
There is a reset button located on the back
of the head. Unscrew the cap and push the
button to reset. (Be sure to replace black
cap)
Micro/safety switch is not making
contact
Make sure that the unit is on a level surface
and that switch is sitting flush making
contact with the metal on the back of the
body
Indicator light won’t turn on
and unit will not heat
Plug not properly inserted into outlet
Reinsert the plug
TO RESET:
Located on the back of the fryer head, it will read ‘reset’
With the unit unplugged and fully cooled off, Press red button in to reset
unscrew the know to expose red button
Loading ...