Loading ...
Loading ...
Loading ...
30
We recommend that you place the device face down on the floor, taking care to protect its front
surface from scratches.
UNLOCKING THE DEVICE’S HANGING FRAME
FIXING THE HANGING FRAME TO THE WALL
Take a flat-
bladed screw-
driver and lift
the slider, taking
care not to
bend it.
While keeping the slider
raised, push the hanging
frame towards the bottom
of the heater to release the
upper brackets S2. We rec-
ommend that you wear
protective gloves.
Swivel the hanging
frame downwards on
the lower brackets S1.
Remove the hanging
frame.
S
2
S1
1
2
3
4
Place the hanging
frame on the
floor against the
wall. Locate
drilling points A.
Refit the hanging
frame, lining up with
drilling points A to
find drilling points B
(you can also use a
level).
Drilling points A show the position for the lower fas-
tenings.
Drilling points B show the position for the upper fas-
tenings.
Drill the 4 holes and insert the wall plugs.
Use suitable wall plugs when fitting on a
specific support (e.g. plasterboard wall).
Position the hanging frame and screw it
down.
1 2
3
4
Drilling
points A
Drilling
points A
Drilling
points B
Loading ...
Loading ...
Loading ...