Loading ...
Loading ...
Loading ...
6
Controls
Your Airvolution Canopy rangehood features touch controls with four speed
levels of extraction.
OPERATING YOUR RANGEHOOD
After plug in power, will into Stand By mode automatic.
Timer button
Time setting:
Keep pressing it when the machine is in stand by mode, it would start the time
setting. After
pressing, the hour display would be flashing, you could press" "or"
" to do the setting. Press" " again, change to minute setting, press"
"or" " to do the setting.
The third time press" " or wait 10s, the time setting would finish.
Timer setting：
Short press during working mode, pre-set cycle :
off→15min
s→30mins→45mins→60mins→off.
" "or" " is used for adjusting timer time, except "off" timer setting.
Quick timer: Press & hold for 1 second, the digital display will be flashing
and starting the 5 minutes counting down. After 5 minutes working, the motor &
light will turn off automatically & Buzzer
sound on.
Speed plus button
For increasing the speed of the motor. Totally 4 speeds.
When the “TURBO” speed symbol appear, the motor reach the highest speed.
After 5 minutes
working
in Turbo
mode, the motor would change to
the third speed
automatically.
Speed decrease button
For decreasing the speed of the motor.
Light button
Short press for lamp power control.
1.Motor symbol, will rotate when the motor is working;
2.Time display;
3.Timer symbol, will appear when timer is setting and counting;
4.Light symbol;
5.Motor speed;
6.Turbo speed symbol, will appear when the speed is highest setted;
7.Alarm symbol, will appear 5 seconds when the counting down of timer is over.
8.Cleanning symbol, appear when total working time up to 14 hours or at the first
time using after pluging.
Display explanation:
Loading ...
Loading ...
Loading ...